Operating instructions

2
English
Important
Cautions for use and storage
The appliance may become warm during operation. This is normal.
Turn off the appliance before changing the trimming length or
removing the comb attachment.
Close supervision is necessary when the appliance is used by, on,
or near children or invalids.
Use the appliance only for its intended use as described in these
operating instructions. Use comb attachments recommended by the
manufacturer.
Moving parts should not be tampered with.
The appliance should not be used on animals.
The appliance should not be disassembled. Take it to a qualified
serviceperson when service or repair is required.
The appliance should be stored in a place that is not exposed to
direct sunlight or near a heater or other source of heat.
The appliance should be stored in a place where it cannot fall into a
bath or a sink. It should not be placed in or dropped into water or
other liquids.
Cautions for cleaning
The housing should not be taken apart as this can affect the
watertight construction of the appliance.
Wash the appliance in tap water. Salt water, boiling water and
cleaning products that are designed for toilets, bathrooms or kitchen
appliances should not be used. The appliance should be submerged
in tap water for a short time only.
Clean the housing only with a soft cloth slightly dampened with tap
water or soapy tap water. Caustic cleaners such as benzine or
bleach should not be used.
SPECIFICATIONS
Batteries: Two AAA (LR03) dry-cell batteries (DC 3.0 V)
(Sold separately)
Weight: 128 g (including comb attachment and batteries)
This product is intended for household use only.

•
•
•
•
•
•
•
•
•

•
•
•
ER2403_USA.indb 2 2007/06/14 21:41:28
English
3
Parts identification
A Main body
1 Mounting hook
2 Trimming length
indicator
3 Switch
4 Battery cover
B Blade block
5 Cleaning lever
6 Moving blade
7 Stationary blade
C Comb attachment
D Oil
E Cleaning brush












Replacing batteries
1. Slide the switch on the main body downwards to turn
off the trimmer.
2. Remove the battery cover and insert two AAA (LR03)
dry-cell batteries as illustrated.
3. Reattach the battery cover.
Old and new batteries should not be mixed.
Remove the batteries when not using the trimmer for a long
time.
•
•
ER2403_USA.indb 3 2007/06/14 21:41:29