Operating instructions
hrvatski
English
3
Charging the trimmer
Charge
You can fully charge the trimmer in 8 hours if it is losing speed.
A full charge supplies enough power for approximately 50
minutes of use.
1.Insert the appliance plug into the
trimmer.
2.Plug in the adaptor into a
household outlet.
The charge indicator lamp lights and
stays on until the adaptor is removed
from a household outlet.
•
Cord Trimming
If you insert the appliance plug to the trimmer and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
If the trimmer does not work, continue charging it for approx. 1
minute.
•
•
Using the trimmer
Use
Trimming your beard and moustache
1.Apply a few drops of the oil to the blades.
(See page 4.)
2.Turn the dial to move the comb attachment
to the desired trimming length (between
2 mm and 18 mm).
Indicator
Trimming
length
Indicator
Trimming
length
1 2.0 mm 7 10.5 mm
2 3.0 mm 8 12.0 mm
3 4.5 mm 9 13.5 mm
4 6.0 mm 10 15.0 mm
5 7.5 mm 11 16.5 mm
6 9.0 mm 12 18.0 mm
3.Slide the switch on the main body upwards to turn on
the trimmer.
4.Place the angled face of the comb
against the skin and cut the beard by
moving the trimmer in all directions to
obtain a uniform cut.
With curly facial hair, the comb attachment
may not cut all of the hair. In this case,
remove the comb attachment and use a
conventional comb to draw out the
remaining uncut hair.
•
►
English
3
Charging the trimmer
Charge
You can fully charge the trimmer in 8 hours if it is losing speed.
A full charge supplies enough power for approximately 50
minutes of use.
1.Insert the appliance plug into the
trimmer.
2.Plug in the adaptor into a
household outlet.
The charge indicator lamp lights and
stays on until the adaptor is removed
from a household outlet.
•
Cord Trimming
If you insert the appliance plug to the trimmer and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
If the trimmer does not work, continue charging it for approx. 1
minute.
•
•
Using the trimmer
Use
Trimming your beard and moustache
1.Apply a few drops of the oil to the blades.
(See page 4.)
2.Turn the dial to move the comb attachment
to the desired trimming length (between
2 mm and 18 mm).
Indicator
Trimming
length
Indicator
Trimming
length
1 2.0 mm 7 10.5 mm
2 3.0 mm 8 12.0 mm
3 4.5 mm 9 13.5 mm
4 6.0 mm 10 15.0 mm
5 7.5 mm 11 16.5 mm
6 9.0 mm 12 18.0 mm
3.Slide the switch on the main body upwards to turn on
the trimmer.
4.Place the angled face of the comb
against the skin and cut the beard by
moving the trimmer in all directions to
obtain a uniform cut.
With curly facial hair, the comb attachment
may not cut all of the hair. In this case,
remove the comb attachment and use a
conventional comb to draw out the
remaining uncut hair.
•
►
English
3
Charging the trimmer
Charge
You can fully charge the trimmer in 8 hours if it is losing speed.
A full charge supplies enough power for approximately 50
minutes of use.
1.Insert the appliance plug into the
trimmer.
2.Plug in the adaptor into a
household outlet.
The charge indicator lamp lights and
stays on until the adaptor is removed
from a household outlet.
•
Cord Trimming
If you insert the appliance plug to the trimmer and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
If the trimmer does not work, continue charging it for approx. 1
minute.
•
•
Using the trimmer
Use
Trimming your beard and moustache
1.Apply a few drops of the oil to the blades.
(See page 4.)
2.Turn the dial to move the comb attachment
to the desired trimming length (between
2 mm and 18 mm).
Indicator
Trimming
length
Indicator
Trimming
length
1 2.0 mm 7 10.5 mm
2 3.0 mm 8 12.0 mm
3 4.5 mm 9 13.5 mm
4 6.0 mm 10 15.0 mm
5 7.5 mm 11 16.5 mm
6 9.0 mm 12 18.0 mm
3.Slide the switch on the main body upwards to turn on
the trimmer.
4.Place the angled face of the comb
against the skin and cut the beard by
moving the trimmer in all directions to
obtain a uniform cut.
With curly facial hair, the comb attachment
may not cut all of the hair. In this case,
remove the comb attachment and use a
conventional comb to draw out the
remaining uncut hair.
•
►
3
Punjenje šišača
Ako šišač usporava, može se potpuno napuniti za 8 sati.
• Kada je u potpunosti napunjen, aparat ima dovoljno energije za
otprilike 50 minuta.
1. Umetniteutikačušišač.
2. Uključiteprilagodnikustrujnu
utičnicu.
• Lampica pokazatelja punjenja
svijetli i ostaje uključena dok se
prilagodnik ne ukloni iz strujne
utičnice.
Šišanjeuzuporabukabela
Ako utaknete utikač u šišač i prilagodnik uključite u strujnu
utičnicu, uređaj možete koristiti čak i ako je kapacitet baterije
nizak
• Ako šišač ne radi, nastavite puniti otprilike 1 minutu.
Korištenje šišača
►Šišanjebradeibrkova
1. Nanesitenekolikokapiuljanaoštrice.
(Pogledajtestr.4)
2. Zakrenitekotačićdabistepodesili
nastavaksčešljemnaželjenuduljinuza
šišanje(od2mmdo18mm).
Pokazatelj
Dužina
šišanja
Pokazatelj
Dužina
šišanja
1 2,0 mm 7 10,5 mm
2 3,0 mm 8 12,0 mm
3 4,5 mm 9 13,5 mm
4 6,0 mm 10 15,0 mm
5 7,5 mm 11 16,5 mm
6 9,0 mm 12 18,0 mm
3. Dabisteuključilišišač,pomakniteprekidačnakućištu
premagore.
4. Stavitestranučešljakojajepodkutom
uzkožuiskratitebradupomicanjem
šišačausvimsmjerovimadabiste
postiglijednolikiučinak.
• Ako imate kovrčave dlačice na licu,
nastavak s češljem ih možda neće sve
skratiti. U tom slučaju uklonite nastavak
s češljem i koristite obični češalj da biste
izvukli preostale neskraćene dlačice.
Uporaba
Punjenje








