Datasheet

■SPECIFICATIONS
Type
Compact fan type
Item
Model No.
ER-Q
Charge removal time 1.5 sec. approx. (Note)
Ion balance ±10 V or less (Note)
Power supply voltage 24 V DC ± 10%
Power consumption 200 mA or less
Discharge method High-frequency AC method
Discharge output voltage ±2 kV approx.
Max. fan speed 6.4 m/s (Note)
Max. fan volume 0.2 m
3
/min
Main functions
Discharge check, Discharge error, Fan error,
Check output, Error output
Indicators Discharge (DSC): Green LED, Alarm (ALARM): Red LED
Ozone generation amount 0.02 ppm or less (Note)
Ambient temperature
0 to +50 °C +32 to +122 °F (No dew condensation)
Storage: -10 to +65 °C +14 to +149 °F
Ambient humidity 35 to 65% RH (No dew condensation) / Storage: 35 to 65% RH
Vibration resistance
10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z
directions for two hours each
Grounding method C (capacitor) grounding
Material Enclosure: PBT, Discharge needle: Tungsten
Weight Main unit: 110 g approx.
Accessories
Connector for wiring: 1 set
[Manufactured by MOLEX: Housing (5557-08P), Terminal (5556T)]
Note: Typical value at 100 mm 3.937 in from directly in front of air outlet, fan speed MAX, with no fi lter
installed.
■OPTIONS
ER-QMS1/ Mounting bracket
The ER-Q mounting bracket. Adjust the air output direction.
ER-QCC2/ Connector-attached cable
Length 2 m 6.562 ft
ER-QCC5/ Connector-attached cable
Length 5 m 16.404 ft
• 0.13 mm
2
8-core
connector cabtyre cable
• Cable outer diameter:
ø3.7 mm
ø0.146 in
ER-VAPS1/ AC adapter
• IN: 100 to 240 V AC, 50 / 60 Hz, 40 VA
• OUT: 24 V DC, 750 mA
• Ambient temperature: 0 to +40 °C
+32 to +104 °F
ER-QFX5/ Air fi lter
Fan intake fi lter (5 pcs. per set)
ER-QANT/ Discharge needle unit
Unit with tungsten needles (1 pc.)
■ PRECAUTIONS FOR PROPER USE
This product does not possess control functions
for safety assurance such as accident prevention.
This product has been developed / produced for
industrial use.
Do not use this product in places where there
may be a danger of flammable or combustible
items being present.
•
•
•
■DIMENSIONS (Unit: mm in)
■ CHARGE REMOVAL CHARACTERISTICS (TYPICAL)
Measured using a 150 mm 5.906 in CPM (charge
plate monitor) (At center of CPM)
Filter cover
Alarm indicator (red)
Discharge indicator
(green)
Power switch
2-M3 screws (depth 10 0.394) (Note)
Ion air outlet
Connector 5559-08Ｐ
manufactured by MOLEX
Fan speed control
2-ø3.5 ø1.378
mounting hole
Discharge needle unit
ø 3.7 ø 0.146 cable 0.5 m 1.64 ft
3.5
0.138
3.5
0.138
5.5
0.217
52
2.047
25.4
1.000
29
1.142
33
1.299
65
2.559
58
2.283
19.8
0.780
60
2.362
0
0
100
3.937
200
7.874
300
11.811
400
15.748
500
19.685
-200
-7.874
-150
-5.906
-100
-3.937
-50
-1.969
0
0
50
1.969
100
3.937
150
5.906
200
7.874
Charge removal width W (mm in)
Charge removal distance L (mm in)
2 sec
5 sec
10 sec
CPM
L
W
−
＋
0
0
100
3.937
200
7.874
300
11.811
400
15.748
500
19.685
-200
-7.874
-150
-5.906
-100
-3.937
-50
-1.969
0
0
50
1.969
100
3.937
150
5.906
200
7.874
Charge removal field (vertical direction) (Fan speed MAX, filter is mounted)
Charge removal distance L (mm in)
2 sec
5 sec
10 sec
CPM
L
W
＋
−
Charge removal field (horizontal direction) (Fan speed MAX, filter is mounted)
Charge removal width W (mm in)
Note: Screw threads exclusive for
mounting brackels. Do not
use them in mounting with
other products.
When mounting this product
directly to a case or such, fix
it with M3 screws using
2-ø3.5
ø1.378 mounting
holes.
No. LCE-ERQ-3 March, 2010
2431-1 Ushiyama-cho, Kasugai-shi, Aichi,
486-0901, Japan
Phone: [phone]
FAX: [phone]
SUNX Limited
Phone: [phone]
FAX: [phone]
Overseas Sales Division
http://www.sunx.com
All information is subject to change without prior notice.