Datasheet
243
EQ-30
SPECIFICATIONS
0.2 to 2 m 0.656 to 6.562 ft
0.1 to 2 m 0.328 to 6.562 ft
10 % or less of operation distance
Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper)
10 to 30 V DC Ripple P-P 10 % or less
50 mA or less 55 mA or less 90 mA or less
NPN open-collector transistor
• Maximum sink current: 100 mA
•
Applied voltage: 30 V DC or less
(between output and 0 V)
NP• Residual voltage: 1 V or less
(at 100 mA sink current)
0.4 V or less
(at 16 mA sink current)
DC-12 or DC-13
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition) (Note 3)
2-turn mechanical adjuster with pointer
Incorporated (Two units of sensors can be mounted close together.)
3 (Industrial environment)
IP67 (IEC)
20 to55 C 4 to131 F (No dew condensation or icing allowed), Storage:25 to70 C 13 to158 F
35 to 85 % RH, Storage: 35 to 85 % RH
Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face
EN 50081-2, EN 50082-2, EN 60947-5-2
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s
2
acceleration (50 G approx.) in X, Y and Z directions for three times each
Infrared LED (modulated)
Enclosure: Polyalylate and Polyethylene terephthalate, Lens: Polyalylate
0.3 mm
2
3-core (EQ-34W: 4-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm
2
, or more, cable.
150 g approx.
Adjusting screwdriver: 1pc.
Type
Item Model No.
Adjustable range (Note 1)
Sensing range
with white non-glossy paper
at setting distance 2 m 6.562 ft
Hysteresis
Repeatability
Supply voltage
Current consumption
Output
Utilization category
Output operation
Short-circuit protection
Response time
Operation indicator
Stability indicator
Distance adjuster
Automatic interference prevention function
Pollution degree
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
EMC
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
Cable
Cable extension
Weight
Accessory
Environmental resistance
NPN output PNP output Two outputs
EQ-34 EQ-34-PN EQ-34W
()
PNP open-collector transistor
• Maximum source current: 100 mA
•
Applied voltage: 30 V DC or less
(between output and
V)
NP• Residual voltage: 1 V or less
(at 100 mA source current)
0.4 V or less
(at16 mA source current)
<Far (Main) output, Near (Sub) output>
NPN open-collector transistor
• Maximum sink current: 100 mA
•
Applied voltage: 30 V DC or less
between Far (Main) output and 0 V
between Near (Sub) output and 0 V
NP• Residual voltage: 1 V or less
(at 100 mA sink current)
0.4 V or less
(at 16 mA sink current)
Far (Main) output: Red LED
lights up when the Far
(Main) output is ON
Near (Sub) output: Red LED
lights up when the Near
(Sub) output is ON
Far (Main): 2-turn mechanical adjuster
with pointer
Near (Sub): Variable adjuster
Notes: 1) The adjustable range stands for the
maximum sensing range which can be
set with the adjuster.
The sensor can detect an object 0.1 m
0.328 ft, or more, away.
However, the detectable area of the
Near (Sub) type of the EQ-34W begins
at 0.2 m 0.656 ft.
2) The Near (Sub) distance adjustable range, L2, changes with the setting of the Far (Main) distance, L1,
as shown in the table below.
EQ-34W Near (Sub) distance adjustable range
0 0.5
1.640
1
3.281
1.5
4.921
2
6.562
2
6.562
1.5
4.921
1
3.281
0.5
1.640
Near (Sub) distance
adjustable range L
2
(m ft)
Far (Main) setting distance L1 (m ft)
EQ-34W
Far (Main) setting
distance L
1
Near (Sub) distance
adjustable range L2
2 m 6.562 ft
1.5 m 4.921 ft
1 m 3.281 ft
0.5 m 1.640 ft
0.2 m 0.656 ft
1 to 2 m
0.85 to 1.5 m
0.65 to 1 m
0.35 to 0.5 m
0.2 m
3.281 to 6.562 ft
2.789 to 4.921 ft
2.133 to 3.281 ft
1.148 to 1.640 ft
0.656 ft
Far (Main): 0.2 to 2 m 0.656 to 6.562 ft
Near (Sub): Refer to diagram in (Note 2)
Far (Main): 0.1 to 2 m
0.328 to 6.562 ft
Near (Sub): 0.2 to 2 m
0.656 to 6.562 ft
[with Near (Sub) distance for adjuster at max.]
[]
[]
[]
08/2005