EP3205 MASSAGE LOUNGER Instruction Manual 36
BEFORE USING THE UNIT Attaching the Armrests 1. Insert the armrests into the seat. SETTING UP THE MASSAGE LOUNGER • Marks indicating left and right can be found on the underside of each armrest. After removing everything from the box, you should have the following Massage Lounger Accessories Armrest Marks indicating left and right can be found on the underside of each armrest. Front Control Panel Stand Pillow Align the o marks. Front 3.
Adjusting the Control Panel Stand 1. The control panel stand can rotate forward and back. BEFORE USING THE UNIT 2. The angle can also be adjusted. Please Check the Following Before Using the Unit Check the Surrounding Area (1) Check that there is nothing around the unit. (2) Check that there is enough room (40 cm) to recline the unit. Lower the Legrest Prior to Sitting Down. • When the legrest is raised, press to lower the legrest before sitting down. • Do not sit on the legrest when it is raised.
PART NAMES AND FUNCTIONS CONTROL PANEL Massage Lounger Front Control Panel Stand Pillow • For use when watching TV or just relaxing. • The pillow has a height adjustment. (See Page 41) • The pillow is detachable, and can also be flipped over. Armrest ON/OFF Button Quick Stop Button • Press this button to start the massage and to stop it at any time during the massage. * The massage heads will not move until you press one of the Programmed Operation buttons or Manual Operation buttons.
4. After the Massage has been Completed the Unit will Automatically Stop. USING THE MASSAGE LOUNGER WHEN YOU WANT TO USE THE MASSAGE LOUNGER RIGHT AWAY. (PROGRAMMED OPERATION) Display of Massage Areas Program Strength Display • Shows the massage areas currently being massaged by flashing. • This displays the strength of the selected program. Movement Display Program Strength Button • This displays the program that is currently in use.
Additional Information ADJUSTING THE SEAT Display of Massage Areas Reclining the Massage Lounger Sometimes the massage areas displayed on the control panel will be different from what you are actually experiencing. * Due to limitations in the size of the display, the massage areas displayed on the control panel are only a general indication of the area being massaged. This means that sometimes the areas that are actually being massaged are different from those shown on the display.
WHEN YOU WANT TO CREATE YOUR OWN MASSAGE PROGRAM (SELF PROG.) Display of Massage Areas Degree of Fatigue Display • The massage points currently being massaged flash. • This is used in the Self Program to indicate how tired you are in each area of your back and legs. Movement Display Program Strength Display • This displays the program that is currently in use. • This displays the strength of the selected program. Pressure Level Display • This displays the amount of pressure exerted on the body.
Changing the Degree of Fatigue During the Program Additional Information • After pressing the button corresponding to the area you want to change and making any changes, press • You can change the program even during mid-program by following the procedures on Pages 48 and 49. (1) Press location to select the area you want to change. (2) Press fatigue to input the degree of fatigue. . (3) Press after you have finished making the desired changes.
WHEN YOU WANT MORE CONTROL OVER INDIVIDUAL MASSAGE SETTINGS. (USER ADJUSTMENT FUNCTIONS) Using the User Memory Buttons allow you to customize the back massage. The more you use these functions the more you’ll customize it to provide just what it is you like. 1 1. Press . 2. Select and press the User Memory Button you require.
Additional Information WHEN YOU WANT TO CONTROL EVERYTHING YOURSELF. (MANUAL OPERATION) Detailed Information regarding User Adjustment Functions (1) What happens when I press • The program will be changed so that the overall amount of time spent on that particular area during the program is increased. • The massage action at the time when the button was pressed will first be repeated.
4. When you want to customize your massage even more. You can adjust the height and lateral movement of the massage heads, as well as the speed and strength of the massage. Adjusting Massage Position Press . Adjusting Massage Speed Press . Adjusting Massage Strength Press . Adjusting Lateral Movement Press . • Press the button as many times as you like in any direction to move the massage heads to the position you require. • Each time you press the button the massage heads move approximately 1.
5. After the massage has been completed the unit will automatically stop. Leg/Calf/Seat Massage • The unit will automatically stop approximately 15 minutes after the massage begins. • It will take a number of seconds for the air to be completely released. (After pressing you will hear air being released.) • Press if you want to stop the massage during a program. Press if you want to stop the massage immediately. Preparation Adjust the angle of the legrest and slide before starting a massage.
AFTER COMPLETING THE MASSAGE CLEANING AND MAINTENANCE Moving the Unit Using the Wheels to Move the Unit RETURN THE SEAT TO THE ORIGINAL POSITION 1. Check that nothing is under the legrest and that air is being released. • Please lift up the front of the unit when moving it by holding the pipe section on either side of the legrest. * Please be careful because the unit is heavy. • It is easier to move the unit with the massage heads retracted and the backrest in the upright position.
TROUBLESHOOTING Problem PROBLEM Problem Cause and Remedy It is not possible to recline the unit. The legrest cannot be raised or lowered. H If the unit encounters an obstacle or if excessive force is exerted on it during operation, in the interests of safety the unit will come to a stop. If all markings and buttons on the control panel start to flash, which is extremely unusual, turn off the power switch, wait for approximately 10 seconds and then turn the power switch on again.
IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS Basic precautions should always be followed when using an electrical unit, including the following. Please ensure that you read all instructions before using the Household Massage Lounger. DANGER – To reduce the risk of electric shock: 1. Always unplug the unit immediately after use. 2. Always unplug the unit before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1.
OPERATING PRECAUTIONS WARNING: To avoid damaging the chair, follow these precautions: 1. The chair is designed for a maximum user weight of 120 kg. Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the unit. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty. 2. Do not sit on or drop the control panel. Do not pull the control panel cord or the power cord.
SPECIFICATIONS Power Supply: Power Consumption: Upper Body Massage Massage Area (Up-Down): Massage Area (Left-Right): AC230V 50 Hz 220 W Approx. 76 cm (The massage heads move a total of approx. 64 cm) Distance between Massage Heads during Operation Neck, Shoulder, Lower Back: Approx. 5 – 21 cm Back: Approx. 5 – 15 cm Massage Area (Forward-Back): Approx. 10 cm Up-Down Movement Speed: Approx. 25 – 90 sec. return. Massage Speed: Knead A, B: Approx. 9 – 15 cycles/min. Tap: Approx. 200 – 700 sec.
