Operating Instructions Instrucciones de Uso Mode d’emploi Household Massage Lounger Sillón de Masaje Doméstico Fauteuil vibromasseur Model No./Nº de Modelo/Nº de modèle English EP-MS40 1 Español S1 Français F1 Before operating this unit, please read these instructions completely. Antes de utilizar esta unidad, lea compleatamente estas instrucciones y guárdelas para referencia futura.
IMPORTANT SAFETY INSTRUCTIONS English Basic precautions should always be followed when using an electrical unit, including the following. Please ensure that you read all instructions before using the Household Massage Lounger. DANGER – To reduce the risk of electric shock: 1. Always unplug this unit from the electrical outlet immediately after using and before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
English SAFETY PRECAUTIONS CAUTION: To avoid the risk of injury: 1. Persons with any of the conditions listed below or who are undergoing medical treatment or suffer from medical conditions should consult with their physicians before using the unit: a) Pregnant women, people who are ill, in poor physical shape. b) People suffering from back, neck, shoulder, or hip pain. c) People who have a pacemaker, defibrillator, or other personal medical devices prone to electronic interference.
English 13. Do not drag or push the unit in an installed state. Do not move the unit using the wheels on the floor. (Always place a mat or similar object underneath.) The floor may be damaged. 14. Do not stand on the leg/foot massage section. The end portion of the leg/foot massage section may rotate, or the main unit may tip, causing accident or injury. Also, the bottom of the leg/foot massage section may make contact with and scratch the floor. 15.
English GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
PART NAMES AND FUNCTIONS English Main unit 5 Front Back 6 14 1 2 15 3 7 4 8 16 9 17 10 18 11 19 12 20 13 21 22 1 Retracted Position of Massage Heads 8 Armrest 2 Leg/foot massage lock release strap • See page 11. 9 Specification Label 3 Seat 4 Leg/foot massage section • Includes an air massage function. Calf section 10 Connector 11 Power Cord • Cord length: approx. 70.8 in. (1.
English Controller Display 1 1 Pre-Programs Display • When selecting a program: The mark for the currently selected program flashes. • During the massage: The frame of the current program is displayed. 2 4 2 Self Program Display • When selecting a program: The mark for the currently selected program flashes. • During the massage: The current program ( or ) is displayed. 8 3 Self Program Set Time Display • Displayed when the Self Program is selected.
SETTING UP THE UNIT English Where to use the unit Leg/foot massage section Approx. 15.7" (40 cm) Depth approx. 42.5" (108 cm) Width approx. 27.5" (70 cm) Mat • Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of heating sources, because this can cause discoloration or hardening of the surface material. • Placing a mat or cloth under the unit is recommended to prevent floor damage. The size of the mat should be sufficient [at least 25.6 in. × 45.3 in.
2 How to move the unit English Since the unit is very heavy [approximately 103.4 lbs (47 kg)], be careful to avoid back injuries. (The unit must be carried by two people.) Put the unit down slowly and carefully watch your step. See Caution No. 13 on page 3. Lifting the Unit • You may damage the floor by dropping the unit if you do not hold it correctly. • Check that the leg/foot massage section is stored away and locked. Place the controller and power cord on the seat In narrow corridors etc.
3 Attach the controller holder, and insert the controller English 1 2 Velcro fasteners 4 Put the backrest cushion in place 5 Connect the power cord to the unit 1 Check for dirt and damage on appliance inlet of the power switch section and the connector of the power cord. 2 Insert the connector into the appliance inlet. Appliance inlet 3 Be sure to push the connector in all the way.
1 Remove the backrest cushion. English BEFORE EVERY MASSAGE (CHECK THE UNIT) 2 Make sure there are no tears or rips in the fabric. Unfasten the zippers (3 locations) and fold down the back pad See Caution No. 10 on page 2. Check 3 Make sure the massage heads are in Check the retracted position and then replace and fasten the back pad. See Caution No. 3 on page 2.
4 Make sure there is no foreign matter English between the unit. See Caution No. 11 on page 2. Check the storage section Notes How to take out and store away the leg/ foot massage section 1 Pull up on the leg/foot massage lock release strap. 1 • The leg/foot massage section is ejected halfway with the sole section closed. 2 Pull the leg/foot massage section as far as it goes. 3 Open the sole section by tilting forward.
all the way into the appliance inlet. English 6 Be sure to push the power connector 7 Switch on the power supply. 1 See Warning No. 1 on page 1. 2 3 1) Insert the power plug into an electrical outlet. 2) Turn the lock switch key to the “open” position. 3) Slide the power switch to the “on” position. Sit down in a massage position. 8 Sit with the back of your head aligned with the upper part of the backrest.
If you cannot reach the leg/foot massage section to push it forward English Try following A and B . A Slide your body forward. B Use the leg/foot message section without fully extending it and with the calf section in a near vertical position. A • If the above position feels uncomfortable, use the leg/foot massage section with the calf section tilting forward. (In this case your calves will not be massaged. To enjoy a calf massage, please use the leg/foot massage section separately.
• After 15 minutes of use, we recommend that you take a 10 minute break. • Use the unit up to twice per day, for a total of 30 minutes. See Caution No. 5 and 9 on page 2. 1 Press the English SELECTING A MENU AND STARTING THE MASSAGE button to turn on the power. The menu selection buttons flash. Have you removed the backrest cushion? (See page 10.) 1 Is the leg/foot massage section ejected? (See page 12.
USING PRE-PROGRAMS English [Program Selection Mode] Press the button to enter the program selection mode for Pre-Programs. (The power will turn off automatically if no operation is performed within 3 minutes after entering the program selection mode.) Press or to select a program. 1 Select one of “DEEP”, “QUICK (8 min)”, “RELAX” and “REFRESH”. The mark for the currently selected program will flash. 2 Select a program and press the button. 1) Put your head on the backrest.
English 3) A double beep and the flashing of indicate that the massage heads are being finely adjusted to the shoulder position. [Shoulder Position Adjustment Mode] Press or to adjust the position. [Each press moves the massage heads approximately 0.6 in. (1.5 cm).] 4) When the shoulder position is matched, press begin the program. to • The program will begin automatically after 15 seconds if the is not pressed.
To change the content of the massage English To select a different program from Pre-Programs Press the button, and select a different program. Upper body massage will stop temporarily. (See page 15.) To change to Self Program Press the button and select a program. Upper body massage will stop temporarily. (See page 18.) To change to Manual operation Press the button. Action will start immediately. (See page 21.) Display during program The frame of the current program is displayed.
[Program Selection Mode] Press the button to enter the program selection mode for Self Program. English USING SELF PROGRAM (The power will turn off automatically if no operation is performed within 3 minutes after entering the program selection mode.) Press or to select a program. 1 Select either “Neck and shoulders” or “Back and lower back”. The mark for the currently selected program will flash. 2 Select a program and press the button. 3 Set duration of massage. Press the – + adjustment buttons.
When you have selected “Neck and shoulders” English The operation to determine your approximate shoulder position will begin. (See page 15.) 1 A double beep and the flashing of indicate that the massage heads are being finely adjusted to the shoulder position. [Shoulder Position Adjustment Mode] Press or to adjust the position. [Each press moves the massage heads approximately 0.6 in. (1.5 cm).
English To Customize To adjust program intensity Content of display Intensity 1 2 3 Adjustment Press the – + adjustment buttons. To use the leg/foot massage simultaneously Press the button. (See page 23.) To change the content of the massage • With Self Program, you cannot set a massage longer than the massage time you first set. If you set a short time by mistake, end the massage, and then press the button again and enter new settings.
USING MANUAL OPERATION English See Caution No. 5 on page 2. Press the button. 1 The operation to check you are seated (tapping around shoulders) will begin. Caution Keep your head on the backrest until the massage begins. Otherwise an error message (U10) is displayed and operations are terminated. 2 When the unit has confirmed that you are seated, 6 types of action including Soft Shiatsu, Knead and Tap are performed sequentially.
English To Customize To adjust the position Press or to adjust. • Each press moves the massage heads approximately 0.6 in. (1.5 cm). • When you hold down the button, the operation will continue until you release it. Flashing indicates the approximate current position. To adjust program intensity Content of display Intensity 1 2 3 Adjustment Press the – + adjustment buttons.
USING LEG/FOOT MASSAGE FOR CALVES AND SOLES English Press the button. The leg/foot massage begins. button again to end the massage. • Press the When you are using leg/foot massage only, terminate the massage using the button. To adjust the intensity of the leg/foot massage Content of display Press the leg/foot massage buttons the intensity. to adjust 1 2 Intensity Leg/foot massage duration To use leg/foot massage only: The massage lasts for approximately 15 minutes.
English AFTER COMPLETING THE MASSAGE Timer function The massage will complete automatically approximately 15 minutes after the start of operations. Interrupting the massage Press the button. • The massage heads move to the retracted position. If you experience any problems Press the button. • All operations will stop immediately. • Get off the unit carefully to prevent the unit from tipping over. Returning to the lounger state See Caution No. 14 and 15 on page 3.
CLEANING AND MAINTENANCE English See Danger No. 1 on page 1. Seat Fabric 1 Wipe the unit with a cloth moistened with mild detergent and thoroughly wrung out. • Never use chemicals such as thinner, benzine, alcohol, etc. 2 Use water or a mild detergent and brush on areas where the seat fabric is particularly soiled. • Be careful not to brush the fabric too much to avoid damage. 3 Wipe the unit with a cloth moistened with plain water and thoroughly wrung out. 4 Allow the unit to dry naturally.
You can remove the backrest cushion cover and back pad for washing. Back pad English Backrest cushion cover How to wash Cautions for washing To hand wash (avoid machine washing) Wash the backrest cushion cover with the zippers closed. 1 Immerse the cover in water of no more than 86 °F (30 °C), and wash by pushing down gently. Caution: Use a mild detergent. Detergents including bleaching agents will bleach the cover. Do not use such detergents. 2 Rinse well. 3 Gently squeeze out the water.
English FITTING AND REMOVING THE BACKREST CUSHION COVER AND BACK PAD Removing Backrest cushion cover Unfasten the rear zipper and remove the cushion. Back pad 1 Unfasten the zippers (3 locations). 2 Unfasten the velcro fastener in the bottom section of the seat, and remove the back pad.
English Fitting Backrest cushion cover 1 Check the vertical and horizontal orientation of the cushion. Side view Front Slight concave Narrower at end Downward 2 Fold the cushion forwards and insert it into the zipper opening. Front When the cushion is fully inserted, hold the top corners of the cover and shake it up and down a few times. 3 Close the zipper. 4 To ensure the cushion is equally distributed within the cover, pat the front and rear of the cover a few times.
USING AS A LOUNGER English Put the backrest cushion in place. 1 The backrest cushion has a predetermined orientation. 1 Front Slight concave Narrower at end Downward 2 The leg/foot massage section should be stored away. 2 When wrinkles and sags are noticeable in the backrest cushion or back pad Backrest cushion cover Pat the front and rear a few times. Back pad 1 Wrinkles in the back pad: Gently rub towards the edges.
English GENERAL CONTENT OF MASSAGE PROGRAMS Contents of Pre-Programs DEEP Brief knead to loosen neck and between the shoulder blades Soft shiatsu and kneading to loosen back and lower back Knead to fully loosen neck and between the shoulder blades Knead and tap to fully loosen back and lower back Gentle knead to relax neck and between shoulder blades QUICK (8 min.
TROUBLESHOOTING English Problem Cause and Remedy Motor Noises • It sounds and feels like the massage heads are straining to get over wrinkles in the cloth. • There is operational noise of kneading or tapping actions. • There is a creaking noise when the massage heads are in operation. • There is a rattling sound when the massage heads move up or down. • The belt can be heard rotating. • The motor groans when it comes under load. • There is clunking or grinding sound when the massage heads move in and out.
Error display Explanations If the shoulder position cannot be correctly determined, this error message is displayed and , then sit back operations are terminated. If this error occurs even if you are seated, press all the way to the backrest and operate from the start again. English Error display Operation is terminated because there is a problem with internal communication. Operation is terminated because there is a problem with the massage mechanism. * Please contact an authorized service center.
