Operating Instructions Instrucciones de Uso Mode d’emploi Household Massage Lounger Sillón de Masaje Doméstico Fauteuil vibromasseur Model No./Nº de Modelo/Nº de modèle English 1 Español S1 Français F1 EP-MA70 Before operating this unit, please read these instructions completely. Specifications and shapes of massage loungers may vary depending on the model. Antes de utilizar esta unidad, lea compleatamente estas instrucciones y guárdelas para referencia futura.
IMPORTANT SAFETY INSTRUCTIONS English Basic precautions should always be followed when using an electrical unit, including the following. Please ensure that you read all instructions before using the Household Massage Lounger. DANGER – To reduce the risk of electric shock: 1. Always unplug this unit from the electrical outlet immediately after using and before cleaning. WARNING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
English SAFETY PRECAUTIONS CAUTION: To avoid the risk of injury: 1. Persons with any of the conditions listed below or who are undergoing medical treatment or suffer from medical conditions should consult with their physicians before using the unit: a) Pregnant women, people who are ill, in poor physical shape. b) People suffering from back, neck, shoulder, or hip pain. c) People who have a pacemaker, defibrillator, or other personal medical devices prone to electronic interference.
English 15. Always raise the comfort cushion to check that the fabric of the unit itself has not been ripped before using the unit. Please also check other areas to ensure that the fabric has not been ripped. No matter how small the rip, if you find one then immediately stop using the unit, unplug the power cord and have the unit repaired at an authorized service center. 16.
English OPERATING PRECAUTIONS CAUTION: To avoid damaging the chair, follow these precautions: 1. The chair is designed for a maximum user weight of 264 lbs (120 kg). Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the unit. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty. 2. Do not sit on or drop the controller. Do not pull the controller cord or the power cord.
GROUNDING INSTRUCTIONS English This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Power Supply: Rated Current: Upper Body Massage Massage area (Up-Down): Massage area (Left-Right): Massage area (Forward-Back): Massage speed: Air massage Air Pressure (Calf ): Reclining angle: Automatic shut-off: Dimensions When not reclined (H × W × D): When reclined (H × W × D): Weight of Unit: Dimension of box (H × W × D): Weight in box: Maximum user weight: Minimum distance from wall: English SPECIFICATIONS AC 120 V 60 Hz 2.5 A (Electric heating equipment 0.5 A) Approx. 30.7 in.
Part names and functions English Main unit Front 1 2 3 4 5 6 13 7 8 12 9 10 11 7 1 Controller • See pages 9 –10. 10 Seat/Thigh side massage section • Includes integrated air massage function. 2 3 Retracted position of massage heads 11 Legrest Leg/Sole massage section • Includes air massage function. • Position can be adjusted by the leg slide. 4 5 Pillow Shoulder side massage section • Includes integrated air massage function.
14 15 English Back 16 17 22 14 15 16 17 18 18 The legrest can be stored away when the massage is not used. 19 Legrest is rotated manually while pulling on the lever. 20 21 Back Cover Child Safety Label Controller Holder Controller Stand Power switch section • See pages 14 and 17. • Lock switch is set to “open” and power switch is set to “on” prior to leaving the factory. Leg/Sole massage section .
Controller English 1 2 3 4 5 19 6 18 7 17 8 9 16 10 15 11 12 14 1 2 On/Off 3 4 5 6 7 8 9 10 9 13 11 12 Speaker Quick Stop • Press this button to stop the massage immediately. 13 Position • See page 21. Ottoman Angle Adjustment Confirmation Reclining Angle Adjustment 14 15 Manual Operation • See page 27. 16 Repetition • See page 23. Add Tapping massage • See page 29. 17 Stretch On/Off • See page 30. Voice Guidance Volume • See page 42.
1 2 3 4 English Display 5 11 10 1 8 Massage Area Current approximate massage position flashes. 2 3 Voice Guidance Volume 4 5 Massage Ending 6 9 Time Remaining Operation • Currently performing massage operation is displayed while massaging. • Currently selected operation’s frame is flashed when Manual Operation is selected. 7 6 Currently selected air massage operation lights up. Current air massage position flashes. 7 8 9 10 11 Currently selected stretch operation lights up.
Setting up the massage lounger English 1 Where to use the unit • Ensure adequate space to recline. • Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of heating sources, because this can cause discolouration or hardening of the synthetic leather. • Place the unit on a mat to prevent floor damage. • When placing a mat under the unit, the size of the mat should be sufficient [at least 47.2 in. × 27.6 in.
English Confirm that the main unit and all accessories are in the box. Main unit Controller Accessories Armrests (Right/Left) Comfort cushion Controller Stand Controller Holder Fixing screw Clip Pillow Power Cord Right/Left indication • Small holes on the inside fabric are an intentional part of the functional design. Attachment Screws (M6 × 13) — Black 4 pcs. (M6 × 20) — Silver 2 pcs. Allen Key Sole Shiatsu Sheet (Cross-section) 1/6 in.
Assembly English 1 Attaching the controller stand to the right or left side panel Fasten the controller stand with the attachment screws. (4 positions) Use this screw: Attachment screws (M6 × 13) × 4 pcs. (Black) How to tighten the screws Hole Attachment screw Allen key • Tighten the 4 screws lightly using your fingers. (Make the screws level with the holes.) • Align the 2 prongs of the side panel with the holes of the controller stand.
3 Connecting the air plugs (On both sides) English • Insert the air plugs into the lower part of the armrest. * Arm massage will not operate unless the air plugs are inserted securely. View from bottom Air plug jack Front Air plug Push on the air plugs until you hear it click into place. 4 Connect the power cord to the unit 1 Check for dirt and damage on appliance inlet of the power switch section and the connector of the power cord.
6 Placing the controller English 1 Placing the controller into the 1 controller stand. 2 Fasten the controller cord using the clip. • Fasten so the cable under the clip will not sag too much with the backrest raised. (Because there is a chance of your legs, etc., getting caught) 2 When the controller stand is attached on the left side • Run the controller cord to the left. 1 Press the button on the controller to turn on the Legrest power.
1 Fasten the pillow using the fasteners. • See page 19 for guidelines on positioning the pillow during the massage. Fasteners Fasteners English 7 Fasten the pillow and the comfort cushion. 2 Fasten the comfort cushion using the zip.
Before sitting down English Check the following before using the unit 1 Check the surrounding area. Make sure there are no objects, people, or pets in the vicinity of the unit. 2 Flip up the comfort cushion and deploy the leg/sole massage section. See Caution No. 3 on page 2, and No. 17 and 18 on page 3. • Do not massage with the comfort cushion still on the backrest. Comfort cushion How to deploy the leg/sole massage section 1 Pull the release lever in the 2 2 direction of the arrow.
1 Insert the power plug into an electrical socket. English 4 Switching on the power supply 1 2 Turn the lock switch key to the “open” 2 position. 3 3 Slide the power switch to the “on” position. 5 Check the unit. sure there are no tears or rips in the fabric. 1 Make See Caution No. 15 on page 3. Fabric Backrest Comfort cushion Retracted position 2 Make sure there is no foreign matter between the parts of the unit. See Caution No. 17 on page 3.
6 Adjust the pillow position. English 1 Remove the pillow. 2 Adjust the height of the pillow so that the bottom edge is at ear level. • If positioned too low, the pillow may interfere with a massage of the area around the neck. • When the reclining angle changes, the position of the pillow may shift. In that case, readjust the position. Pillow Lower edge of the pillow Ear level 7 Slide the sole massage section to your preferred position. It will slide out up to 7.1 in. (18 cm).
English If you want a complete massage Automatic programs the 1 1 Press power. button to turn on the • The power is turned off automatically if 3 minutes or more pass without operation. 2 Press one of the buttons ( 2 ) to select the program. Characteristics of Automatic programs (Upper Body) REFRESH This is a program to relax your body pleasantly with light stimulation mainly by tapping massage. DEEP This is a standard program to deeply relax your muscles mainly by kneading massage.
1 Body scanning will commence when the program is selected. ( will flash.) English • The body scanning will properly detect height ranges between approximately 55 and 72.8 in. (140 and 185 cm). Sit as far back in the seat as possible with your head on the pillow. The unit will automatically recline to the correct massage position. Correct Massage Position Reclined approx. 12° 1 2 3 Adjust the pillow height so that the bottom edge of the pillow is at ear level. See page 19.
1 English To customize 2. Turning the air or stretch massage on or off Operation can be turned on/off by pressing the buttons on the left. On/off for the air massage or stretch can be confirmed on the display. (Lit: On, Off : Off ) 2 Chest Shoulder Hand/Arm Lower back Leg/Foot Hip Leg • Your preferred settings for these items can be saved and reused. (See page 24.) 3 4 5 3. Turning the “Heat” massage heads on or off 6 7 Your can turn the “Heat” massage heads on/off by pressing . 1.
4. To repeat the current massage English Contents of current massage action will be repeated by pressing . • The “REPEAT” command may not be accepted when the massage action is changing in that moment. • will flash while the massage is repeated. 5. Changing the intensity of the air massage When performing a massage of the shoulder, arm, lower back or legs, adjust the intensity by pressing the button.
English To save your preferences Automatic programs You can save your preferred settings set during the Automatic programs, and have them reproduced next time you are being massaged. You can save the settings for each program. Example: When using the “REFRESH” program 1. You have set Air Massage “SHOULDER” and “LEG/FOOT” to “On”, and Stretch “CHEST” to “On”. (Air intensity was set to “Level 1” at this time.) 2. “Heat” massage heads was set to “Off ”, and Back intensity was set to “Level 3”. 3.
To start a saved program English 1 Press the button to turn on the power. • The power is turned off automatically if 3 minutes or more pass without operation. 1 2 2 Select the User button with your saved settings. • The selected User button will light. (Example: ) Press. 3 Select and press the Automatic program that was saved using the User button. (Example: “REFRESH”) 3 The massage with your stored settings will start after body scanning.
English To turn the “Heat” massage heads on or off See Caution No. 21 on page 3. 1 Press the button to turn on the power. • The power is turned off automatically if 3 minutes or more pass without operation. 1 2 Press the Automatic program button and start the massage. : The “Heat” function is automatically turned on. Flashing (Warming up) Lit (On) Flashing: Warming up “Heat” massage heads. Lit: “Heat” massage heads are on. 2 • The temperature cannot be adjusted.
Selection of a massage technique and body region English Manual Operation See Caution No. 6 on page 2. 1 Press the button to turn on the power. • The power is turned off automatically if 3 minutes or more pass without operation. 1 2 Select the part you want to massage ( ). 2 • The list of body parts that can be selected is displayed on the left. (Example) When “NECK” is selected 3 Select the massage action you prefer. 3 4 Body scanning for Manual Operation Neck/Shoulder/Full back ....
Select your favourite technique in Steps 2 to 4. button within approximately 40 seconds after reselecting the technique in Step • Press the cancelled automatically. English To change the technique in the middle of a massage 2, otherwise the reselection will be If you want to massage with tap technique only 1 Press the 2 Select button to turn on the power. . 3 Start the tap technique by pressing . • Body scanning will not be performed.
3. Adding tapping actions to the current operation English Press the • You can select tap on/off every time it is pressed. * You cannot select on/off when you are massaging only with the tap action. button. 4. To turn the “Heat” massage heads on or off You can turn the “Heat” massage heads on or off by pressing . Flashing: Warming up “Heat” massage heads. Lit: “Heat” massage heads are on. Off : “Heat” massage heads off. • The temperature cannot be adjusted.
English Performing Air massage or Stretch action Air actions/Stretch actions 1 Press the 1 button to turn on the power. • The power is turned off automatically if 3 minutes or more pass without operation. 2 The operation can be turned on/off by pressing the buttons on the left. 2 On/off for the air massage or stretch action be confirmed on the display.
Effective method for using the leg/foot air massage/stretch English Adjust the legrest so that your feet fit in it completely. For a person with small body dimensions • If the legrest is raised, it is easier to fit your sole on it. Press the For a person with large body dimensions • If the slide of the sole massage section is adjusted, your knees will not be lifted as much. button. Push with your feet to slide the legrest out. Lift your feet slightly and the legrest returns.
English How to use the Hand/Arm massage See Caution No. 14 on page 2. 1 Lift up the Hand/Arm massage section. 2 Insert the hand with fingers extended. Effective method for using the Hand/Arm massage Position the forearm and hand at the centre of the armrest. Insert the hand all the way. Centre of the armrest • Raise the backrest if any difficulty is experienced when positioning the hand and forearm.
Operation of the Shoulder, Hand/Arm, Lower back, Leg/Foot Air massage English Operation of the Shoulder massage Lateral pressure is applied to squeeze your shoulders to your arms. Operation of the Lower back massage Lateral pressure is applied to squeeze from your lower back to your thighs. The region from your posterior to your hamstrings is stimulated with 3 airbags on the seat. Operation of the Hand/Arm massage Hand/Arm Hand to arm will be compressed as it is clamped from top and bottom.
English Operation of the Shoulder Blade, Pelvis, Leg Stretch Operation of the Shoulder Blade Stretch The muscles in the region from your shoulder blades to your chest are stretched by holding your shoulders with the shoulder side massage section and pressing your back with the massage heads. Operation of the Pelvis Stretch The muscles are loosened by widely twisting and swaying around your pelvis.
Adjustment of the reclining angle and/or legrest English 1 Press the button to turn on the power. • The power is turned off automatically if 3 minutes or more pass without operation. 2 Press the or button to adjust the angle. • The movement will continue until a “beep-beep-beep” sound is heard if the buttons are held down. • The movement of the legrest may be delayed slightly. • The armrest will move in accordance with the reclining of the backrest. Approx. 120˚ Approx. 85˚ Approx. 95˚ Approx.
English After completing the massage Timer function The massage will complete automatically approximately 16 minutes after the start of operations. • The foot massage section will retract, and the legrest will be lowered automatically so you can stand up safely. The foot massage section will not retract all the way when the legrest is extended, since the sole massage section will hit the floor. Raise your legs to retract all the way. • The backrest will not rise automatically.
2 Store the legrest. 2 English See Caution No. 3 on page 2, and No. 17 and No. 18 on page 3. 1 Pull the lever in the direction of the arrow. 2 Rotate from top. 3 Rotate until it locks into place. 4 Release the lever. 5 Check that the legrest is locked. 1 3 Press firmly. 4 Let go. Disconnecting the power See Danger No.1 on page 1, Caution No.2 on page 2, and No.10 and No.14 on page 4. 1 Slide the power switch to the “off ” position. 2 2 Turn the key to the “lock” position and remove it.
English Cleaning and Maintenance See Danger No. 1 on page 1. Areas covered with synthetic leather Wipe these areas with a soft, dry cloth. • When using commercially available leather-care products (wipes), follow its instructions. • If the synthetic leather is particularly dirty, wipe it in the following manner: 1. Soak a soft cloth in water or a 3% to 5% solution of mild detergent and wring it out thoroughly. 2. Dab the surface with the moistened cloth. 3.
Moving the Unit English See Caution No.18, No22 and No. 23 on page 3. Moving by lifting it with 2 or more persons Move the unit with 2 or more people in front and back of the unit holding on the side of the legrest and the groove on the back cover of the backrest. Hold onto the sides. Groove Hold onto the sides of the legrest. Place your fingers in the groove. Do not hold onto the front side. The sole massage section might slide, and injuries may occur.
English Using the wheels to move the unit Move the unit by holding onto the side of the legrest and using the wheels. Hold onto the sides. Do not hold onto the front side. The sole massage section might slide, and injuries may occur. Roll the unit slowly Hold onto the sides of the legrest. Place the controller and power cord on the seat. Lift it no higher than waist height Wheels The floor may get damaged, so it is recommended to place a mat etc. on the floor.
English About the Automatic programs/About the massage techniques/About the voice guidance function About the Automatic programs (* Time spent on “Finishing Touches” differs depending on your height and intensity setting.
About the massage techniques (The figures are images of the respective operations.) SHIATSU Strong pointed massage. ROLL TAP Regional roll & stretch massage. Tapping massage. KNEAD Deep kneading action. FULL BACK ROLL Stretching massage along the backbone. SWEDISH Softer planar massage action. English ULTRA KNEAD Fast kneading in small circles. • The respective techniques are suitable for specific body parts. Actions of Shiatsu for the “NECK” are different from of the actions for the “SHOULDER”.
Troubleshooting English Problem Cause and Remedy Motor Noises • It sounds and feels like the massage heads are straining to get over wrinkles in the cloth. • There is operational noise of kneading or tapping actions. • There is a creaking noise when the massage heads are in operation. • There is a rattling sound when the massage heads move up or down. • The belt can be heard rotating. • The motor groans when it comes under load. • There is a strange sound when the massage heads move in and out.
Problem English Cause and Remedy “Heat” massage heads do not get warm. • button is set to Off. • Sense of warmth from the massage heads will differ depending on your body shape, massage area, massage action, clothing, and ambient temperature. The “Heat” massage heads do not cool down even after the “Heat” massage heads setting is turned off. • Because of the structure of the heater, the “Heat” massage heads will feel warm for a while after heating due to the residual heat.
Error display English Contents of the error will be displayed in the remaining time display area when an error occurs during the operation. Time Remaining Display • For the error “U10” and Error display will flash alternately. Contents For safety reasons, operation will terminate automatically when it cannot detect if someone is seated. If this error occurs even if you are seated, press the button, sit back all the way to the backrest, and operate from the start again.
Problème Cause et solution Les têtes de massage « Heat » ne se réchauffent pas. • Le bouton est désactivé. • La sensation de chaleur provenant des têtes de massage varie en fonction de la forme du corps, de la zone de massage, de l’action du massage, des vêtements et de la température ambiante. Les têtes de massage « Heat » ne refroidissent pas même une fois que le paramètre des têtes de massage « Heat » est désactivé.
Panasonic Corporation of North America One Panasonic Way, 1H-1 Secaucus, NJ 07094 1-800-338-0552 (USA only) for questions and comments 1-877-PANAFIX (USA only) for massage chairs customer service www.panasonic.com/massage Panasonic Canada Inc. 5770 Ambler Drive Mississauga, ON L4W 2T3 1-800-561-5505 www.panasonic.ca © Panasonic Electric Works Co., Ltd. 2011 No.
