Datasheet
CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-1740-2400-102
REV.
1.2
SUBJECT
CLASS 2 BLUETOOTH LOW ENERGY
SINGLE MODE MODULE
PAGE
23 of 34
CUSTOMER’S CODE
PAN1740
PANASONIC’S CODE
ENW89846A1KF
DATE
22.04.2014
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
22 STORAGE NOTES
(1) The module should not be stressed mechanically during storage.
(2) Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
Storage in salty air or in an environment with a high concentration of corrosive
gas, such as Cl2, H2S, NH3, SO2, or NOX
Storage in direct sunlight
Storage in an environment where the temperature may be outside the range of
5°C to 35°C range, or where the humidity may be outside the 45 to 85% range.
Storage of the products for more than one year after the date of delivery Storage
period: Please check the adhesive strength of the embossed tape and soldering
after 6 months of storage.
(3) Keep this product away from water, poisonous gas and corrosive gas.
(4) This product should not be stressed or shocked when transported.
(5) Follow the specification when stacking packed crates (max. 10).
23 SAFETY CAUTIONS
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide by
these specifications, without deviation when using the products. These products may short-
circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated
when a short circuit occurs, then provide the following failsafe functions, as a minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a
protection device.
(2) Ensure the safety of the whole system by installing a redundant circuit or another
system to prevent a dual fault causing an unsafe status.
24 OTHER CAUTIONS
(1) This specification sheet is copyrighted. Reproduction of this data sheets is
permissible only if reproduction is without alteration and is accompanied by all
associated warranties, conditions, limitations, and notices.
(2) Do not use the products for other purposes than those listed.
(3) Be sure to provide an appropriate fail-safe function on your product to prevent an
additional damage that may be caused by the abnormal function or the failure of
the product.
(4) This product has been manufactured without any ozone chemical controlled
under the Montreal Protocol.
(5) These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special
conditions carefully to determine whether or not they can be used in such a
manner.
In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
where liquid may splash.










