Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor SMD 22 µF 350 V 20 % (Ø x L) 18 mm x 7.3 mm 1 pc(s)

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB(Large Can Size)

– EEE-61 –

A±0.2

( ) Reference size

0D±0.5

B±0.2

(I)

(P)

(I)

–

0.3 max.

Pressure Relief

Capacitance (μF)

Rated voltage Mark

Series identiﬁcation

Lot number

Negative polarity

marking (–)



&#$

■ Features

●

Endurance : 105 °C 3000 h to 5000 h

●

RoHS directive compliant

Surface Mount Type

Series:

(Large Can Size)

Type:

■ Speci cations

Category Temp. Range –25 °C to +105 °C

Rated W.V. Range 160 V.DC to 450 V.DC

Nominal Cap. Range 2.2 μF to 100 μF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I

0.06 CV +10 (μA) After 2 minutes

tan

Please see the attached standard products list

Characteristics

at Low Temperature

W.V. (V) 160 200 250 350 400 450

(Impedance ratio at 120 Hz)

Z(–25 °C) / Z(+20 °C)

223566

Endurance

After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors shall meet

the limits speciﬁ ed below. (Size code G13 : 3000 hours, G17 : 4000 hours)

Capacitance change ±20 % of initial measured value

tan

200 % of initial speciﬁ ed value

DC leakage current

initial speciﬁ ed value

Shelf Life

After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,

capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

Resistance to

Soldering Heat

After reﬂ ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.

Capacitance change ±10 % of initial measured value

tan

initial speciﬁ ed value

DC leakage current

initial speciﬁ ed value

■ Dimen sions in mm (not to scale) ■ Marking

Example : 160 V 10 μF

Size

code

DLA,BHIWPK

G13 10.0 13.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20

G17 10.0 16.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20

H16 12.5 16.5±0.5 13.5 15.0 max. 4.7 0.9±0.2 4.4 0.70±0.30

J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30

J21 16.0 21.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30

K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30

K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30

Rated Voltage (V.DC)

Frequency (Hz)

120 1 k 10 k

f < 30 k 30 k

100 k

160 to 250 0.55 0.85 0.90 1.00

350 to 450 0.50 0.80 0.90 1.00

■ Frequency correction factor for ripple current

(Unit : mm)

2C 160 V

2D 200 V

2E 250 V

Rated Voltage Mark

2V 350 V

2G 400 V

2W 450 V

01 Sep. 2013

Summary of content (2 pages)

PAGE 1
Aluminum Electrolytic Capacitors/ EB(Large Can Size) Surface Mount Type Series: EB(Large Can Size) Type: V ■ Features ● Endurance : 105 °C 3000 h to 5000 h ● RoHS directive compliant ■ Specifications Category Temp. Range –25 °C to +105 °C Rated W.V. Range 160 V.DC to 450 V.DC Nominal Cap. Range 2.2 μF to 100 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.
PAGE 2
Aluminum Electrolytic Capacitors/ EB(Large Can Size) ■ Standard Products Endurance : 105 °C 5000 h (G13 : 3000 h, G17 : 4000 h) Case size W.V. (V) 160 Cap. (±20 %) 250 350 400 450 Ripple tan d Endurance Part No. Current (RoHS:compliant) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (mA) (hours) 70 0.15 3000 EEVEB2C100Q Length (μF) 10 (mm) 10 (mm) 13.5 G13 33 12.5 16.5 H16 470 68 200 Size Code Dia. 47 Min. Packaging Q'ty Speciﬁcation 0.