Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EE107 –
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure relief
+
Radial Lead Type
Series:
EE
Type:
A
Di men sions in mm (not to scale)
Frequency correction factor for ripple current
Body Dia.
φ
D10 12.5 16 18
Lead Dia.
φ
d0.6 0.6 0.8 0.8
Lead space F 5.0 5.0 7.5 7.5
[mm]
Features
High ripple current (at high frequency):
40 % higher than ED Series
Endurance: 105 °C 8000 h to 10000 h
RoHS directive compliant
Specifi cations
Category Temp. Range –25 °C to + 105 °C
Rated W.V. Range 160 V .DC to 450 V .DC
Nominal Cap. Range10 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.06 CV +10 (µA) After 2 minutes
tan
δ
W.V. 160 200 250350400450
(120 Hz/+20 °C)
tan
δ
0.15 0.15 0.15 0.20 0.24 0.24
Endurance
After following life test with DC voltage and +105 °2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ
10 : 8000 hours
φ
12.5 to
φ
18 : 10000 hours
Capacitance change ±20 % of initial measured value
tan
δ
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W. V.
(V. DC)
Cap.
(µF)
Frequency (Hz)
60
<
120
<
300
<
1 k
<
10 k
<
100 k
<
160 to 450
10 to 82 0.25 0.35 0.50 0.65 0.90 1.00
100 to 330 0.30 0.400.550.700.901.00
Sep. 201000

Summary of content (4 pages)