Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ ED
– EE199 – sn –
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure
relief
+
Radial Lead Type
Series:
ED
Type:
A
Di men sions in mm (not to scale)
Ripple current Frequency Coeffi cient
Body Dia.
φ
D10 12.5 16 18
Lead Dia.
φ
d0.6 0.6 0.8 0.8
Lead space F 5.0 5.0 7.5 7.5
(mm)
Propose EE series for New design
Specifi cations
Category Temp. Range –25 °C to +105 °C
Rated W.V. Range 160 V .DC to 450 V .DC
Nominal Cap. Range10 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.06 CV +10 (µA) After 2 minutes application of rated working voltage at +20 °C
tan
δ
Please see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage),when the
capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration :
φ
10=8000 hours,
φ
12.5 to
φ
18=10000 hours
Capacitance change ±20 % of initial measured value
tan
δ
<
200 % of initial specied value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Frequency
(Hz)
Cap.(µF)
50
<
f < 120 120
<
f < 300 300
<
f < 1 k 1 k
<
f < 10 k 10 k
<
f < 30 k 30 k
<
f
<
100 k
Cap. < 100 µF 0.30 0.40 0.55 0.70 0.90 1.00
100 µF
<
Cap. 0.35 0.45 0.60 0.75 0.90 1.00
[mm]
Features
High ripple current (at high frequency)
Endurance : 105 °C 8000 h to 10000 h
Including low profi le products (20 mm height)
RoHS directive compliant
Oct. 201002

Summary of content (3 pages)