Manualshelf

Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor SMT 270 µF 35 V 20 % (Ø x H) 10 mm x 10.2 mm 1 pc(s)
12
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors / ZC
Surface Mount Type
High temperature Lead-Free reflow
■ Features
●
Endurance: 4000 h at 125
℃
(The longest endurance in the industry by each case size)
●
Low ESR and High ripple current (85 % over, Lower ESR than Current V-TP)
●
High-withstand voltage (25 V to 63V), Low LC (0.01 CV or 3μF)
●
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
●
Vibration-proof product is available upon request. (φ8 mm and larger)
●
AEC-Q200 qualified *
●
RoHS directive compliant
■ Specifications
■ Marking ■ Dimensions in mm (not to scale)
(Unit : mm)
D A, B I P
C 5.0 5.3 2.2 1.5
D 6.3 6.6 2.6 1.8
D8 6.3 6.6 2.6 1.8
F 8.0 8.3 3.4 3.1
G 10.0
10.3
3.5 4.6
＊
This product qualifi for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Dec. 2014
－
EEE-4
－
H
50 V
10.2
±
0.3
12.0 max.
0.90
±
0.2
0.70±0.2
Damp Heat (Load)
After applying rated working voltage for 2000 hours at +85
℃
±2
℃
/ 85% to 90%RH and then being stabilized
at +20
℃
, Capacitors shall meet the following limits.
±30 % of initial measured value
≦
200 % initial specified value
≦
200 % initial specified value
≦
initial specified value
10.0 max.
0.90
±
0.2
0.70±0.2
E
25 V
J
63 V
7.7
±
0.3
V
35 V
10.2
±
0.3
W K
7.8 max.
0.65
±
0.1
0.35
hours. After stabilizing at room temperature(+15 to 35
℃
), the capacitor shall not exceed the specified limits.
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
±30 % of initial measured value
Rated Voltage Mark
5.8
±
0.3
6.5 max.
0.65
±
0.1
0.35
5.8
±
0.3
7.8 max.
0.65
±
0.1
0.35
Example : 25 V 33 μF　　Marking color : BLACK
L H
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20
℃
, capacitors shall meet the following limits.
±10 % of initial measured value
≦
initial specified value
≦
initial specified value
Shelf Life
After storage for 1000 hours at +125
℃
±2
℃
with no voltage applied and then being stabilized at +20
℃
,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Endurance 1
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +125
℃
for 4000
hours. After stabilizing at room temperature(+15 to 35
℃
), the capacitor shall not exceed the specified limits.
≦
initial specified value
Endurance 2
≦
200 % initial specified value
≦
300 % initial specified value
≦
initial specified value
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +125
℃
for 3000
Nominal Cap. Range
10 μF to 330 μF
Series:
ZC
Type:
V
Category Temp.Range
-55
℃
to +125
℃
Rated W.V. Range
25 V.DC to 63 V.DC
≦
200 % initial specified value
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
CapacitanceTolerance
±20 % (120 Hz/+20
℃
)
DC Leakage Current
l
≦
0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan δ
Please see the attached Standard Products list
±30 % of initial measured value
≦
200 % initial specified value
+0.15
- 0.20
+0.15
- 0.20
+0.15
- 0.20
Size
code
E ZC
Negative polarity marking (
－
)
33
Capacitance (μF)
Series identification
Rated Voltage Mark
Lot number
0.3max.
H
L
φD±0.5
K
A±0.2
W
(I) (P)
(I)
B±0.2
Pressure Relief (φ10 and larger)
( ) Reference

Summary of content (2 pages)