Datasheet
SP-Cap/ Polymer Aluminum Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE17 –
W2
PP
L
W2
H
W1
+-
Cap. Polarity bar (Positive)
W.V. codeLot No.
■ Features
●
Super Low-ESR (4.5 m
액
to 9 m
액
)
● Lower ESR and Higher Capacitance at the same
case size as conventional products.
● Excellent Noise-absorbent Characteristics
● High Ripple Current
● RoHS directive compliant
Surface Mount Type
Series:
S
■ Specifi cations
Series & Size Code
SL SX
Category Temp. Range –40 °C to +105 °C
Rated W.V.Range 2 V.DC to 6.3 V.DC
Nominal Cap.Range 56 µF to 220 µF 82 µF to 560 µF
Capacitance Tolerance ±20 %
DC Leakage Cur rent
Refl ow 240 °C : I
<
0.06 CV (µA) 2 minutes (2 V.DC to 4 V.DC)
I
<
0.04 CV (µA) 2 minutes (6.3 V.DC)
Refl ow 260 °C : I
<
0.1 CV (µA) 2 minutes
tan
δ
<
0.06 (120 Hz/+20 °C)
Surge VoltageRated Working Voltage
҂
1.25 (15 °C to 35 °C)
Endurance
After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Capacitance change ±10% of initial measured value
tan
δ
<
Initial specifi ed value
DC leakage cur rent
<
Initial specifi ed value
Moisture resistance
After storing for 500 hours at 60 °C, 90 %
Capacitance change of
initial measurd val ue
2, 2.5 V.DC 4 V.DC 6.3 V.DC
+70, –20 % +60, –20 % +50, –20 %
tan
δ
<
200 % of initial specifi ed value
DC leakage current
<
Initial specifi ed value
■ Di men sions in mm(not to scale) ■ Marking
(mm)
Series &
Size Code
L±0.2 W1±0.2 W2±0.1 H P±0.3
SL
7.3 4.3 2.4 1.8±0.1 1.3
SX
7.3 4.3 2.4 1.9±0.2 1.3
✽
Externals of fi gure are the reference.
Large Cap
Sep. 201000


