Data Sheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Electrolytic Capacitors
W2
W1
L
P
W2
P
H
+
–
Cap. Polarity bar (Positive)
R.V. codeLot No.
●
High voltage (35 V.DC max.)
●
Low profi le (Height 1.0 mm max.)
●
High ripple current (5600 mAr.m.s. max.)
●
RoHS compliance, Halogen free
Surface Mount Type
Series : CS, CT, CX
Features
Marking Dimensions (not to scale)
Unit : mm
Series CS CT CX
Category temp. range –55 °C to +105 °C
Rated voltage range 4 V.DC to 35 V.DC 2 V.DC to 35 V.DC
Nominal cap.range 10 µF to 120 µF 15 µF to 180 µF 15 µF to 560 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
DC leakage cur rent I < 0.1 CV (A) [2 V.DC to 6.3 V.DC, 2 minutes], I < 0.3 CV (A) [10 V.DC to 35 V.DC, 2 minutes]
Dissipation factor (tan d)
< 0.06 (120 Hz / + 20 °C)
Surge voltage (V.DC) Rated voltage × 1.25 [2 V.DC to 16 V.DC], × 1.15 [20 V.DC to 35 V.DC] (15 °C to 35 °C)
Endurance
+105 °C, 2000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
tan d
< 2 times of the initial limit
DC leakage cur rent
2 V.DC to 6.3 V DC : < 3 times of the initial limit
10 V.DC to 35 V.DC : Within the initial limit
Damp heat
(Steady state)
+60 °C, 90 %, 500 h, No-applied voltage
Capacitance change
of initial measurd val ue
2 V.DC to 2.5 V.DC 4 V.DC, 10 V.DC to 35 V.DC 6.3 V.DC
+70 %, –20 % +60 %, –20 % +50 %, –20 %
tan d
< 2 times of the initial limit
DC leakage cur rent
2 V.DC to 6.3 V.DC : Within the initial limit
10 V.DC to 35V DC : < 3 times of the initial limit
Series L±0.2 W1±0.2 W2±0.1 H±0.1 P±0.3
CS 7.3 4.3 2.4 1.1 1.3
CT 7.3 4.3 2.4 1.4 1.3
CX 7.3 4.3 2.4 1.9 1.3
✽
Externals of fi gure are the reference.
Rated voltage mark
d 2 V.DC
e 2.5 V.DC
g 4 V.DC
j 6.3 V.DC
A 10 V.DC
C 16 V.DC
D 20 V.DC
E 25 V.DC
V 35 V.DC
Speci cations
Nov. 201507