Datasheet

Product Specification
E-XS-ML-5001-1
Specialty Polymer Aluminum Electrolytic Capacitors
(CX/SX)
7
No Item Characteristics Outline of test method
Leakage
Current
≤The value of item 1.
Capacitance
Change
+70%,-20% (2V,2.5V)
+60%,-20% (4V)
+50%,-20% (6.3V)
of initial measured value.
tanδ ≤200% of initial specified
value.
10 Damp
heat,
Steady
state
(Applied
voltage)
Appearance No remarkable abnormal
change shall be occurred.
Test temperature: 60±2°C
Relative humidity: 90%
Applied voltage: Rated voltage
Test time: 500
+24
0
h
Leakage
Current
≤The value of item 1.
Capacitance
Change
±10% of initial measured
value.
tanδ ≤The value of item 3.
11 Endurance
Appearance No remarkable abnormal
change shall be occurred.
Test temperature: 105±2°C
Applied voltage: Rated voltage
Test time: 1000
+48
0
h
Leakage
Current
≤The value of item 1.
Capacitance
Change
±10% of initial measured
value.
tanδ ≤The value of item 3.
12 Shelf life
Appearance No remarkable abnormal
change shall be occurred.
Test temperature: 105±2°C
Test time: 500
+24
0
h
Step Item Electrical
Characteristics
Capacitance ±15% of the value in
step 1.
2
ESR
≤115% times of the
value of item 4.
4 Capacitance 20% of the value in
step 1.
Leakage
current
≤The value of item 1.
Capacitance ±5% of the value in
step 1.
13 Charac-
teristics
at high
and low
tempe-
rature
5
tanδ ≤The value of item 3.
Exposure the capacitor at each
temperature in following order and
measure characteristics at step 2,4 and 5
as described on the left.
If you have doubts about the result of its
measurement, please make a re-check right
after the pre-conditioning explained below.
Pre-conditioning
Dry the products 24h at 125°C
Step Temperature
1 20±2°C
2 -40±3°C
3 20±2°C
4 105±2°C
5 20±2°C
Panasonic Electronic Devices Co.,Ltd
Design, Specifications are subject to change without notice. Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use. Whenever any doubt
about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.