Datasheet

Product Specification
E-XS-ML-5001-1
Specialty Polymer Aluminum Electrolytic Capacitors
(CX/SX)
15
10.Maximum permissible reflow soldering temperature profile
We recommend soldering shall be done according to following maximum permissible reflow soldering
temperature profile.
Reflow soldering
Method: Hot air or infrared furnace.
Temperature measurement point: Top of capacitor.
Measuring method: Thermo-couple(K: φ0.1mm)
Reflow profile:
10.1 Peak temperature 240°C reflow type: suffix code S-R,XR
Reflow times: 2max.
Note: Please refer to item 9.2.1 of the Application Guidelines for the proper storing conditions prior to
the second reflow.
(The second reflow soldering should be performed in 5 days after the first one.)
Panasonic Electronic Devices Co.,Ltd
Design, Specifications are subject to change without notice. Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use. Whenever any doubt
about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.
250
200
150
100
50
Temperature on thesurface of capacitor(ºC)
Time in 200ºC
or more
150 to 200 ºC
120s max.
Peak temperature 5s max.
5
Time(s)
250
240
230
220
210
0 10 20
30 50 6040
Peak Temperature(ºC)
Time in 200ºC or more (s)
Ex.
Peak Temp. Time in 200°C or more
240°C 30s max.
230°C 40s max.