Datasheet

Product Specification
E-XS-ML-5001-1
Specialty Polymer Aluminum Electrolytic Capacitors
(CX/SX)
10
8. Packaging details of carrier tape
8.1 Details of carrier tape Unit : mm
The cover tape shall not cover the sprocket holes
a. Deviation between carrier tape and cover tape shall be less than 0.5mm
b. Cover tape shall not be covered on the feeding holes more than 0.75mm
8.2 Adhesion test
Reasonable pulling strength: 0.1N to 1.3N
Pulling speed: 0.005m/s
Panasonic Electronic Devices Co.,Ltd
(A)
0.5 max
Carrier tape
Cover ta
p
e
(B)
0.75 max
165°
～
180°
Carrier tape
Cover tape
100min. 200min.
Carrier tape
Mounting part Leader part
Direction of feed
Cover tape
Fixed tape
Trailer
p
art
Trailer
p
art
100min.
Design, Specifications are subject to change without notice. Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use. Whenever any doubt
about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.