Datasheet

Product Specification
E-XS-ML-5001-1
Specialty Polymer Aluminum Electrolytic Capacitors
(CX/SX)
8
No Item Characteristics Outline of test method
Leakage
current
≤The value of item 1.
Capacitance
change
±10% of initial
measured value.
tanδ ≤The value of item 3.
14 Surge
Appearance No remarkable abnormal
change shall be occurred.
Test temperature: 15°C to 35°C
Series resister: 1000Ω
Test voltage: Surge
Applied voltage: 1000 cycles of 30±5s
“ON” and 5min 30s “OFF”
15 Vibration Appearance: No remarkable abnormal
change shall be occurred.
Capacitance: During test, measured
value to be stabilized.
(When measured several
times within 30min before
completion of test.)
Frequency: 10Hz to 2000Hz to 10Hz
(One cycle per 20min)
Total amplitude: 1.5mm
Direction and duration of vibration:
2h each for tree right-angle
direction, total 6h.
Mounting method:
The capacitor must be soldered in place.
Panasonic Electronic Devices Co.,Ltd
Design, Specifications are subject to change without notice. Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use. Whenever any doubt
about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.