Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor SMD 330 µF 2.5 V 20 % 1 pc(s)

Issue No. : E-XS-ML-5001-1

Date of Issue : August 20, 2008

PRODUCT SPECIFICATION

Product Description

Customer Part Number

Product Part Number

Country of Origin

Applications

Term of Validity

: Specialty Polymer Aluminum Electrolytic Capacitor

:EEF*********

Japan, Singapore

Printed on the packaging label

It has the intention of being used for a general electronic circuit

given in a notice matter (limitation of a use).

On the occasion of application other than the above, even person in

charge of our company needs to inform in advance.

: August 19, 2009 from the date of issue

･ These specifications are temporary specifications. Ask factory for technical specifications before purchase

and / or use.

Prepared by

Contact Person

Signature

Name(Print)

Title

Authorized by

Signature

Name(Print)

Title

: Engineering Group

Solid Engineering Team

Y.Aoshima

: Engineer

H.Yamamoto

: Manager

No.4036654

Design, Specifications are subject to change without notice. Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use. Whenever any doubt

about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.

Capacitor Business Unit

Panasonic Electronic Devices Co., Ltd

25.Kohata-nishinaka.Uji City,

Kyoto, 611-8585, Japan

Phone (0774)32−1111

Phone：+81-

774-31-7300(Direct)

Fax ：+81-

774-33-4924

Panasonic Electronic Devices Singapore

Pte. Ltd.

No.3 Bedok South Road, Singapore 469269,

THE REPUBLIC OF SINGAPORE

Summary of content (18 pages)

PAGE 1
Issue No. : E-XS-ML-5001-1 Date of Issue : August 20, 2008 PRODUCT SPECIFICATION Product Description Customer Part Number : Specialty Polymer Aluminum Electrolytic Capacitor : Product Part Number :EEF********* Country of Origin : Japan, Singapore Printed on the packaging label : It has the intention of being used for a general electronic circuit given in a notice matter (limitation of a use).
PAGE 2
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) Page No. Contents Contents Notice matter P.1 Scope P.2 Parts Number P.2 Parts Lists P.3 Dimensions and Appearance P.4 Marking P.5 Specifications P.5 Performance Characteristics P.6 to P.8 Embossed tape dimension P.9 Package Specifications P.10 to P.11 Application Guidelines P.12 to P.14 Maximum permissible reflow soldering temperature profile P.15 to P.
PAGE 3
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 1 Notice matter ◆ Law and regulation which are applied ・ This product complies with the RoHS Directive (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment DIRECTIVE 2002/95/EC). ・ No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. ･ We do not PBBs or PBDEs as brominated flame retardants.
PAGE 4
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 2 1. Scope This specification applies to specialty polymer aluminum electrolytic capacitors(CX/SX) for use electronic equipment. 2. Explanation of Part Numbers EEF ○○ ○○ ○○○ ○○ 2-1 2-2 2-3 2-4 2-5 2-1 Common code 2-2 Series and Size code CX/SX 2-3 Rated Voltage Code R.V. code 0D R.V.(V.DC) 2 0E 2.5 2-4 Specialty Polymer Aluminum Electrolytic Capacitor 0G 4 0J 6.
PAGE 5
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 3 Parts Lists(CX Series) Rated Cap. tanδ Voltage (µF) max. (V.DC) 2 2 2 2 2.5 2.5 2.5 4 4 4 4 4 6.3 6.3 6.3 6.3 ESR (mΩ) (100kHz 20°C)max. 220 0.06 15 330 0.06 15 390 0.06 15 470 0.06 15 220 0.06 15 330 0.06 15 390 0.06 15 150 0.06 15 180 0.06 15 180 0.06 12 220 0.06 15 220 0.06 12 100 0.06 15 120 0.06 15 150 0.06 15 150 0.06 12 *1 100kHz/ 20°C to 105°C Parts Lists(S Series) Rated Cap.
PAGE 6
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 4 V.DC 2 (0D) µF 2.5 (0E) 100(101) 120(121) 150(151) 180(181) SX 220(221) CX CX,SX 270(271) SX 330(331) CX,SX CX,SX 390(391) CX,SX CX,SX 470(471) CX,SX ( ) shows R.V and capacitance code. 4 (0G) SX 6.3 (0J) CX CX CX,SX CX,SX CX CX,SX 3. Appearance, Dimensions 3.1 Appearance By visual inspection, no deep cracks and blemishes. 3.2 Dimensions H P P L W2 W1 W2 L±0.2 7.3 W1±0.2 W2±0.1 4.3 2.4 H±0.
PAGE 7
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 5 4. Marking The following items on the capacitor’ surface shall be legible during appearance inspection. These markings shall be shown by the method of indelible way. (1) Rated Voltage (2) Capacitance (3) Polarity (4) Lot No (Notes) Body Color : Black Marking : Laser Code Item A Polarity bar (Positive) B R.V. code C* Cap. D Lot No. * “R” shows the decimal point. R.V.code Marking code R.V(V.DC) d 2 e 2.
PAGE 8
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 6 6. Characteristics No Item 1 Leakage current 2 3 4 5 6 7 Characteristics Outline of test method Suffix code: S-R,XR Series resistor: 1000Ω 2V to 4V Applied voltage: Rated Voltage I≤0.06CV Measuring: 2min 6.3V If you have doubts about the measured result, I≤0.04CV please re-check after the pre-conditioning explained below.
PAGE 9
No 10 11 12 13 Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 7 Item Characteristics Leakage ≤The value of item 1. Current Capacitance +70%,-20% (2V,2.5V) Change +60%,-20% (4V) +50%,-20% (6.3V) of initial measured value. tanδ ≤200% of initial specified value. Appearance No remarkable abnormal change shall be occurred. Endurance Leakage ≤The value of item 1. Current Capacitance ±10% of initial measured Change value. tanδ ≤The value of item 3.
PAGE 10
No 14 Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 8 Item Surge Characteristics Leakage current Capacitance change Vibration ±10% of initial measured value. ≤The value of item 3. No remarkable abnormal change shall be occurred. Appearance: No remarkable abnormal change shall be occurred. Capacitance: During test, measured value to be stabilized. (When measured several times within 30min before completion of test.
PAGE 11
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 9 7.Carrier tape & Reel Dimension Carrier Tape Unit : mm Tape running derection 1.5+0.1 0 4±0.1 2±0.1 1.75±0.1 B t±0.2 5.5±0.1 12±0.3 7.6±0.2 A A B 8±0.1 B-B Cross-Sectional view Series and Size code t 4.5±0.2 CX/SX 2.4 A-A Cross-Sectional view Reel 2±0.5 φ13±0.2 φ80±1.0 R1.0 φ330 φ21±0.8 3.0 14 Panasonic Electronic Devices Co.,Ltd Design, Specifications are subject to change without notice.
PAGE 12
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 10 8. Packaging details of carrier tape 8.1 Details of carrier tape Unit : mm Cover tape Carrier tape 100min. Trailer part 100min. Mounting part Trailer part Fixed tape 200min. Leader part Direction of feed The cover tape shall not cover the sprocket holes Carrier tape Cover tape (B) 0.75 max (A) 0.5 max a. Deviation between carrier tape and cover tape shall be less than 0.5mm b.
PAGE 13
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 11 8.3 Packaging style 1) Carrier tape shall be reeling inside.(seal tape shall be outside.) 2) First of the carrier tape shall be inserted directly to the reel as shown in the below figure and leader part of seal tape shall not be attached. 1) 2) 8.4 Dimensions of outer carton box Dimensions of the carton box are subject to change without notice for adjustment to reel size. (mm) 130±5 395±5 395±5 8.
PAGE 14
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 12 9.Application Guidelines Specialty Polymer Aluminium Electrolytic Capacitor should be used in compliance with the following guidelines. (1) This specification guarantees the quality and performance of the product as individual components. Before use, check and evaluate their compatibility with installed in your products. (2) Do not use the products beyond the specifications described in this document. 9.
PAGE 15
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 13 Always consider safety when designing equipment and circuit. Plan for worst-case failure modes such as short circuits and open circuits which might occur during use.
PAGE 16
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 14 (2) Heat stress of re-flow, etc. Specified re-flow conditions must be strictly observed. Soldering under other conditions can cause short circuits and increases in ESR. (3) Repair and modification by soldering iron. When using a soldering iron, set the tip temperature to no more than 350°C, and work in as short a time as possible under 10s. While soldering, do not apply strong force to the capacitor.
PAGE 17
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 15 10.Maximum permissible reflow soldering temperature profile We recommend soldering shall be done according to following maximum permissible reflow soldering temperature profile. Reflow soldering Method: Hot air or infrared furnace. Temperature measurement point: Top of capacitor. Measuring method: Thermo-couple(K: φ0.1mm) Reflow profile: Temperature on thesurface of capacitor(ºC) 10.
PAGE 18
Product Specification E-XS-ML-5001-1 Specialty Polymer Aluminum Electrolytic Capacitors (CX/SX) 16 10.2 Peak temperature 260°C reflow type: suffix code ER,XE,E4,CX-R Temperature on thesurface of capacitor(ºC) Peak temperature 10s max. 250 200 150 150 to 200 ºC 120s max. 100 Time in 230ºC or more 50 Time(s) Peak Temperature(ºC) 270 Ex. Peak Temp. 260°C 250°C 260 250 Time in 230°C or more 40s max. 60s max. 240 230 0 10 20 30 40 50 60 70 Time in 230ºC or more (s) Reflow times: 2max.