Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/Medium-size FK
– EEE-39 –
A±0.2
W
( ) Reference
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief

',K
Capacitance (μF)
Rated voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
Products Black Dot
(Square)
■ Features
●
Endurance: 5000 h at 105 °C
●
Vibration-proof product is available upon request.
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant
Surface Mount Type
Series:
Medium-size FK
Type:
V
FK
High temperature Lead-Free re ow(suf x:A
✽
)
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V.Range 6.3 V.DC to 10 0 V.DC
Nominal Cap.Range 47 μF to 6800 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (μA) After 2 minutes
tan
d
Please see the attached High temperature lead-free refl ow products list.
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 222222222
Z(–40 °C)/Z(+20 °C) 333333333
Z(–55 °C)/Z(+20 °C) 444333333
Endurance
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
d
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
■ Di men sions in mm (not to scale)■ Marking
Example:6.3 V 3300 μF Marking color : BLACK
Size
code
D L A, B H I W P K
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
Cap (μF)
Frequency (Hz)
120 1 k 10 k 100 k to
47 to 6800 0.75 0.90 0.95 1.00
■ Frequency correction factor for ripple current
(Unit : mm)
j 6.3 V
A 10 V
C 16 V
E 25 V
V 35 V
Rated Voltage Mark
H 50 V
J 63 V
K 80 V
2A 100 V
✽
This product qualify for AEC-Q200, but it has some deviations.
02 Mar. 2014