Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HB
– EEE-24 –
A±0.2
W
( ) Reference size
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
L
+
–
0.3 max.
Pressure Relief (010 and larger)

)#H
Capacitance (μF)
Rated Voltage Mark
Series identification
(HP : Bi-polar)
(BS : 5.5 mm max.)
Lot number
Negative polarity marking (–)
(No marking for the bi-polar)
Mark for Lead-Free
Products Black Dot
(Square)
■ Features
●
Endurance: 105 °C 2000 h
●
5.8 mm height (
<
0
6.3), 5.5 mm height max.
●
Vibration-proof product is available upon request. (
0
8 mm and larger)
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant
Surface Mount Type
Series:
HB
Type:
V
■ Speci cations
■ Dimensions in mm (not to scale) ■ Marking
Example:4 V 47 μF
Marking color: BLACK
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 4 V.DC to 50 V.DC
Nominal Cap. Range 1 μF to 470 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I
<
0.01 CV or 3 (μA) After 2 minutes
(Whichever is greater)
(Bi-polar I
<
0.02 CV or 6 (μA) after 2 minutes)
tan
d
Please see the attached standard products list
Characteristics
at Low Temperature
W.V. (V) 4 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)Z(–25 °C)/Z(+20 °C)7432222
Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3
Endurance
After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C
and then being stabilized at +20 °C, Capacitors shall meet the following limits.
Capacitance change ±20 % of inisial measured value (4 W.V. : ±35 % 6.3 W.V. : ±25 %
0
4 to
0
6.3), 5.5 mm max. : ±25 %
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20°C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
d
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
HA
HB
Long life
↑
5.5 mm
max.
Low
profi le
Size
code
D L A, B H I W P K
B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Size
code
D L A, B H I W P K
B 4.0
5.4
- 0.2
4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.4
- 0.2
5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.4
- 0.2
6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.1
+ 0.1
+ 0.1
●
5.5 mm height max.
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
g4 V
j 6.3 V
A 10 V
C 16 V
Rated Voltage Mark
E 25 V
V 35 V
H 50 V
(Unit : mm)
✽
This product qualify for AEC-Q200, but it has some deviations.
02 Mar. 2015