Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief
3300
FKj
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
products
(Black dot)
Frequency correction factor for ripple current
●
Endurance : 105 °C 5000 h
●
Vibration-proof product is available upon request.
●
RoHS compliant
Features
Speci cations
DimensionsMarking
(Unit : mm)
Surface Mount Type
Series : Medium-size FK Type : V
High temperature
Lead-Free re ow (suffix : A✽)
Category temperature range –55 °C to +105 °C
Rated voltage range 6.3 V.DC to 100 V.DC
Capacitance range 47 µF to 6800 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I
<
0.01 CV (µA) After 2 minutes
Dissipation factor (tan d) Please see the attached characteristics list
Characteristics
at low temperature
V.DC 6.3 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 222222222
Z(–40 °C)/Z(+20 °C) 333333333
Z(–55 °C)/Z(+20 °C) 444333333
Endurance
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
tan
d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan
d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 6.3 V.DC 3300 µF
Marking color : BLACK
Size
code
0D
L A, B H I W P K
H13 12.5 13.5±0.5 13.5
15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.75 0.90 0.95 1.00
R. Voltage
(V.DC)
6.3 10 16 25 35 50 63 80
100
Code j ACEVHJK2A
Mar. 201603