Datasheet

Product Specification
EGC-RF-1-0
Electric Double Layer Capacitor RF series
5
7. Performance Characteristics
Test: Unless otherwise specified, the test shall be applied to JIS-C5101-1.
Initialization of test samples: The samples shall be measured after supplying (5.5V/3.6V) for 2hours with
300ohm resistance in the temperature (20 +/- 10°C, 65 +/- 10% not being wetted with dew) and discharging in
short circuit for 12 to 24 hours.
No Item Performance Test method
1 Capacitance Reffer to individual specification sheet Test shall be by the measurement(1)
2 Internal resistan
c
Reffer to individual specification sheet Frequency : 1 kHz
±
10
％
No DC.bias Voltage
3 Solder ability Terminal to be covered with solder. Immersion depth: 2 to 2.5mm from the
Solder temperature: 230 +/- 5°C
Im mersion time: 2.0 +/- 0.5s
4 Resistance to Capacitance change: Immerision depth: 2 to 2.5mm from the
Soldering Heat <= +/- 10% of the initial measured value. root of terminal
Internal resistance: Item(2) value or less. Solder temperature: 260 +/- 5 °C
Im merision time: 10 +/- 1 seconds
Appearance: No remarkable damages.
5 High temperatur
e
Capacitance change: Test temperature: 55 +/- 2 °C
High humidity <= +/- 10% of the initial measured value. Relative humidity: 90 to 95%
Internal resistance: Item(2) value or less. Test time: 500 +24/-0 hours
Note: No voltage applied
Appearance: No remarkable damages.
6 Endurance Capacitance change: Test temperature: 85 +/- 2°C
<= +/- 30% of the initial measured value. Test time: 2000 +48/-0 hours
Internal resistance: Applied voltage:
<EECRF0H***:40 ohm or less EECRF0H****:5.5V
<EECRF0V***:30 ohm or less EECRF0V****:3.6V
Appearance: No remarkable damages.
Panasonic Electronic Devices Co.,Ltd.