Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsThin film capacitor SMD 3925 0.33 µF 250 Vdc 10 % (L x W) 9.8 mm x 6.3 mm 1 pc(s)

Design and speciﬁ cations are subject to change without notice. Ask factory for technical speciﬁ cations before purchase and/or use.

Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.

Film Chip Capacitor

Type: ECWU(C)

Stacked metallized PEN film as dielectric with simple

mold - less construction

123456789101112

E C W U

Product code

Dielectric

construction

Rated voltage

Nominal capacitance

Cap. Tol. Suffix Suffix

■Features

Small in size

Applicable for reflow soldering

■Recommended Applications

Coupling

By - pass

General purpose

■Explanation of Part Numbers

■Specifications

10%

16VDC

50VDC

100VDC

250VDC

9 12mm

V 16mm

Z 24mm

Tape width

Capacitance tolerance

Capacitance range

Withstand voltage

Category temp.range

Between terminals

16VDC, 50VDC:Rated volt

(VDC)x175% 1 to 5s

100VDC, 250VDC:Rated volt

(VDC)x150% 60s

Soldering conditions

100VDC, 250VDC

: - 40 to + 85:

0.12 to 0.47 µF

(

E12

)

0.056 to 0.22 µF

(

E12

)

0.012 to 1.0 µF

(

E12

)

0.001 to 1.0 µF

(

E12

)

Insulation resistance

Dissipation factor

Reflow soldering

16VDC, 50VDC:240:

max. and

30 sec max. at more than 210˚C (Temp. at cap. surface)

100VDC, 250VDC:

230:

max. and

30 sec max.at more than 210˚C (Temp.at cap.surface)

1.0%(20: ,1kHz)

C>0.33 µF

0.33 µF

16VDC:

3000MΩ • (20: ,10VDC, 60s)

50VDC:

3000MΩ • (20: ,50VDC, 60s)

100VDC, 250VDC:

3000MΩ • (20: ,100VDC,60s)

16VDC:1000M

Ω

• µF min. (20: ,10VDC, 60s)

100VDC, 250VDC:

1000MΩ

•

µF min. (20: ,100VDC,60s)

16VDC, 50VDC

: - 55 to + 105:

16VDC,50VDC

100VDC,250VDC

16VDC

50VDC

100VDC

250VDC

± 5%(J)

± 10%(K) (

100VDC, C

0.15 µF

± 5%(J), ± 10%(K))

Rated voltage

16VDC, 50VDC, 100VDC, 250VDC

Film Chip Capacitor

Summary of content (13 pages)

PAGE 1
Film Chip Capacitor Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold - less construction ■Features Small in size Applicable for reflow soldering ■Recommended Applications Coupling By - pass General purpose ■Explanation of Part Numbers 1 2 3 4 E C W U Product code Dielectric & construction 5 6 7 8 9 10 11 12 C Rated voltage Nominal capacitance Cap. Tol.
PAGE 2
Film Chip Capacitor ■Dimensions in mm (not to scale) ■Construction L Size code L E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z X Y V U T S H W Element (stacked) Outer electrode 0.35± 0.2 0.35± 0.2 Tol. W Tol. 4.8 3.3 4.8 3.3 4.8 3.3 4.8 3.3 6.0 4.1 ± 0.3 ± 0.2 4.1 6.0 4.1 6.0 4.1 6.0 6.0 4.1 6.0 5.0 7.1 5.0 7.7 ± 0.4 5.5 7.1 6.3 ± 0.4 6.3 9.8 8.0 9.8 ± 0.5 8.0 15.2 15.2 10.0 H Tol. 1.4 2.0 2.4 2.8 1.8 ± 0.2 2.0 2.4 2.8 3.2 ❈ ± 0.3 ❈Refer to the column "Rating, Dimensions & Quantity".
PAGE 3
Film Chip Capacitor ■ Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ± 5% (J), ± 10% (K) Cap. (µF) 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Rated volt. 100VDC Part No Dimensions (mm) L W H Rated volt.
PAGE 4
ECWU (C) Type DC100V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics Frequency Characteristics at 1kHz 10 10 Capacitance change(%) Capacitance change(%) 1.0uF 5 From 0.012uF to 1.0uF 0 -5 -10 0.47uF 5 0.10uF 0.047uF 0 0.012uF -5 -10 1 -60 -40 -20 0 20 40 60 80 100120 140 10 1000 10000 Frequency (kHz) Temperature(Dgree C) at 1kHz 10 10 8 8 Dissipation factor(%) Dissipation factor(%) 100 6 4 2 From 0.012uF to 1.0uF 0 1.
PAGE 5
ECWU (C) Type DC100V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 3 3 Effective value (A) Effective value (A) 0.68 uF 2 0.068 uF, 0.056 uF 0.039 uF, 0.033 uF 1.0 uF 0.82 uF 0.56 uF, 0.47 uF 2 0.39 uF 0.15 uF 0.082 uF 0.027 uF, 0.022 uF 1 1 0.047 uF 0.018 uF, 0.015 uF 0.33 uF, 0.27 uF 0.012 uF 0.22 uF, 0.18 uF 0.12 uF, 0.10 uF 0 0 1 10 100 1 1000 Permissible voltage Permissible voltage (at sine wave) 10 0.012 0.015 0.018 0.
PAGE 6
ECWU (C) Type DC100V series (Stacked Metallized Film) Applicable Specifications Pulse Handling Capability (dv/dt) Pulse Handling Capability (dv/dt) (Max 10000cycles) (Max 10000cycles) Rating Voltage DC 100V Capacitance Value(uF) Code 0.012 123 0.015 Current(0-P ) dv/dt(V/us) (A) Rating Voltage Capacitance Value(uF) Code 3.8 0.10 104 123 4.8 0.12 124 0.018 183 5.8 0.15 154 31.5 0.022 223 7.0 0.18 184 21.6 0.027 273 8.6 0.22 224 dv/dt(V/us) Current(0-P ) (A) 21.
PAGE 7
ECWU (C) Type DC16V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 10 10 Capacitance change(%) Capacitance change(%) Frequency Characteristics 5 0.47uF 0 0.22uF -5 0.22uF 5 0.47uF 0 -5 -10 -10 -60 -40 -20 0 20 40 60 80 100120 140 Temperature (Degree C) 1 10 100 1000 Frequency (kHz) 10000 10 8 8 Dissipation factor(%) Dissipation factor(%) at 1kHz 10 6 4 2 0.22uF 6 0.47uF 4 2 0.47uF 0.
PAGE 8
ECWU (C) Type DC16V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible voltage (at sine wave) 100 2 0.47 uF 0.39 0.33 0.27 0.22 0.18 uF uF uF uF uF 0.15 uF 0.12 uF Effective value (V) Effective value (A) 3 10 1 0.27 uF 0.33 uF 0.39 uF 0 10 100 Frequency (kHz) 1000 (Max 10000cycles) Current(0-P ) (A) 0.12 124 0.15 154 0.18 184 10.8 0.22 224 13.2 0.27 274 10.8 0.33 334 0.39 394 15.6 0.47 474 18.8 16 7.2 40 9.0 13.
PAGE 9
ECWU (C) Type DC50V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 10 5 0.22uF 0.10uF 0 -5 Capacitance change(%) 10 Capacitance change(%) Frequency Characteristics -10 5 0.22uF 0.10uF 0 -5 -10 -60 -40 -20 0 20 40 60 80 100 120140 1 Temperature (Degree C) 10 100 1000 10000 Frequency (kHz) 10 8 8 Dissipation factor(%) Dissipation factor(%) at 1kHz 10 6 4 2 6 0.22uF 4 0.10uF 2 0.22uF 0.
PAGE 10
ECWU (C) Type DC50V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible voltage (at sine wave) 100 2 0.22 uF 0.18 uF 0.15 uF 0.12 uF 0.10 uF 0.082 uF 0.068 uF 0.056 uF 1 Effective value (V) Effective value (A) 3 10 0.056 uF 0.068 uF 0.082 uF 0.10 uF 0.12 uF 0.15 uF 0.18 uF 0.22 uF 0 10 100 1000 1 10 100 Frequency (kHz) Voltage Derating by Temperature Pulse Handling Capability (dv/dt) 60 (Max 10000cycles) DC 50V Capacitance Value(uF) Code 0.
PAGE 11
ECWU (C) Type DC250V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 5 10 From 1000pF to 1.0uF 0 -5 Capacitance change(%) Capacitance change(%) 10 Frequency Characteristics -10 5 1.0uF 0.10uF 0 0.010uF 1000pF -5 -10 1 -60 -40 -20 0 20 40 60 80 100 120140 10 Temperature (Degree C) 1000 10000 Frequency (kHz) at 1kHz 10 Dissipation factor(%) 10 Dissipation factor(%) 100 8 6 4 2 From 1000pF to 1.0uF 8 6 1.0uF 0.
PAGE 12
ECWU (C) Type DC250V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 1 3 0.027 uF 0.010uF, 8200pF 0.022 uF 0.018 uF 0.5 5600pF, 4700pF 0.015 uF 0.012 uF Effective value (A) Effective value (A) 0.68 uF, 0.39uF 1.0 uF 0.82 uF 0.18uF, 0.27uF 2 0.47 uF 0.12 uF, 0.15uF 0.56 uF 0.33 uF 0.22 uF 6800 pF 1 3900 pF 3300 up 2700 pF 2200 pF 1800 pF 1500 pF 1200 pF 1000 pF 0.10 uF 0.056 0.047 0.033 0.039 uF uF uF uF 0.068uF, 0.
PAGE 13
ECWU (C) Type DC250V series (Stacked Metallized Film) Applicable Specifications Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Voltage Capacitance Value(uF) Code Capacitance Value(uF) Code 0.0010 102 0.62 0.039 393 9.36 0.0012 122 0.74 0.047 473 11.28 0.0015 152 0.92 0.056 563 13.44 0.0018 182 1.11 0.068 683 dv/dt(V/us) Current(0-P ) (A) Rating Voltage dv/dt(V/us) 240 Current(0-P ) (A) 16.32 615 DC 250V 0.0022 222 1.35 0.082 823 19.68 0.0027 272 1.