Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
L max.
Marking
G max.
H max.25 min.
F±1.0
T max.
00.80±0.05
Copper wire or
copper-clad steel wire
Straight
4.5±0.5
Marking
Cut lead
(Suffix C)
5.0±0.5
Marking
Cut lead
(Suffix D)
5.5±0.5
Marking
Cut lead
(Suffix A)
F
Style E
P
P
0
H1
H0
Unit : mm
●
Packing quantity : 100 pcs./bag
✽
Refer to the page of taping specifications.
●
Taping style
Category temp. range
(Including temperature-rise on unit surface)
630 V.DC
– 40 °C to +105 °C : General resonance circuit
– 40 °C to +85 °C :
When using compulsive air cooling for a resonance circuit
1250 V.DC
– 40 °C to +105 °C : General resonance circuit
– 40 °C to +85 °C :
When using compulsive air cooling for a resonance circuit
3000 V.DC – 40 °C to +85 °C : General high voltage circuit
Rated voltage 630 VDC, 1250 VDC, 3000 VDC
Capacitance range
630 V.DC 0.10 F to 0.33 F
1250 V.DC 0.08 F to 0.12 F
3000 V.DC 0.0024 F to 0.01 F
Capacitance tolerance
630 V.DC ±3 %(H)
1250 V.DC ±5 %(J)
3000 V.DC ±5 %(J)
Dissipation factor (tan d)
630 V.DC
tan d < 0.05 % ( 20 °C, 1 kHz )
tan d < 0.1 % ( 20 °C, 10 kHz )
1250 V.DC
3000 V.DC tan d < 0.1 % ( 20 °C, 1 kHz ), tan d < 0.1 % ( 20 °C, 10 kHz )
Withstand voltage Between terminals : Rated volt. (V.DC)×150 %, 60 s
Insulation resistance (IR)
630 V.DC
IR > 9000 MΩ (20 °C, 500 V.DC, 60 s)
1250 V.DC
3000 V.DC IR > 50000 MΩ (20 °C, 500 V.DC, 60 s)
✽
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Type
Rated voltage
(V.DC)
Capacitance range
(µF)
Taping style
Packing
AD AS BCDE
ECWH(C) 630 0.10 to 0.33
◯
Ammo
●
Taping style
●
Lead spacing
Style Lead spacing
E 7.5 mm
✽
See the column “Rating · Dimensions · Quantity” for packing quantity
Speci cations
Dimensions
Packaging speci cations for bulk package
Taping speci cations for automatic insertion
Feb. 201601