Datasheet
Plastic Film Capacitors
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Metallized Polypropylene Film Capacitor
Type： ECQUA ［Class Ｘ2］
In accordance with UL/CSA and European safety
regulation class X2
■Features
●Compact
●Flame-retardant plastic case and non-combustible resin
●RoHS directive compliant
■Recommended Applications
●Interference suppressors
■Explanation of Part Numbers
■Applicable Standard
UL UL 60384-14
Across-The-Line Capacitors
Antenna-Coupling and Line-By-Pass Components
(0.10 μＦ to 2.2μＦ)
CSA CAN/CSA E60384-14
Across-the-line capacitors
Antenna-isolation and line-by-pass capacitors
(0.10 μＦ to 2.2 μＦ)
Accredited
by UL
Europe EN 60384-14 Class X2 (0.10 μＦ to 2.2 μＦ)
International IEC 60384-14 Class X2 (0.10 μＦ to 2.2 μＦ)
Accredited
by VDE
＊When applying this capacitor to European and American safety standards, please use type designation and rating
such as ECQUA，0.1μF.
＊Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the
latest file No
■Specifications
Category temp. range －40 ℃ to ＋110 ℃
Rated voltage 275 VAC (Safety standard approval)
Capacitance range 0.10 to 2.2μF
Capacitance tolerance ±10 ％ (K)，±20 ％ (M)
Dissipation factor (tanδ)
C≦1.0μF：tanδ≦0.1 ％ (20 ℃，1 kHz)
C＞1.0μF：tanδ≦0.2 ％ (20 ℃，1 kHz)
Withstand voltage
Between terminals: 633 VAC，1183VDC 60s
Between terminals to enclosure: 2050 VAC 60 s
Insulation resistance (IR)
C≦0.33μF : IR≧15000 MΩ (20 ℃, 100 VDC, 60 s)
C＞0.33μF : IR≧5000 MΩ・μF （20 ℃, 100 VDC, 60 s）
C≦0.47μF :IR≧2000 MΩ（20 ℃, 500 VDC, 60 s）
Maximum AC voltage ＊
310 VAC
＊Use of this capacitor is limited to AC voltage (50Hz or 60Hz sine wave).
＊Suitable for series to the mains usage - for more details, please contact your Panasonic contact person.
(no influence of corona discharge at rated voltage)
＊Maximum AC voltage including line voltage fluctuation is 310V AC.
310VAC is not nominal continuous applied voltage, but only indicates maximum value including fluctuation in the voltage
of the power supply. Basic nominal voltage is considered as 240V AC.
This maximum AC voltage is specified in only ECQUA type, not specified in other types.
Please refer to individual product specification, and contact us for further questions regarding design life.
E C Q U A A F
Product code
Dielectric &
construction
Rated voltage Capacitance
Su
ffix Cap. Tol.
K
M
±
10%
±
20%
Blank
Strai
g
ht
A
Cut lead
12