Data Sheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
L max.
Marking
G max.
H max.20 min.
L max.
H max.
F±1.0
S±0.8
4.5±0.5
Marking
T max.
fd±0.05
Copper-clad
steel-wire
Straight
Crimped lead (Suffix B)
Type B
L max.
S±0.8
Marking
H max.
Type D
4.5±0.5
Cut lead (Suffix Z)
Marking
4.5±0.5
Category temp. range
(Including temperature-rise on unit surface)
100 V.DC, 250 V.DC, 400 V.DC, 630 V.DC, 1000 V.DC, 1250 V.DC – 40 °C to +105 °C
125 V.AC, 250 V.AC – 40 °C to +105 °C
Rated voltage
100 V.DC, 250 V.DC,400 V.DC, 630 V.DC, 1000 V.DC, 1250 V.DC
(Derating of rated voltage by 1.25 %/°C at more than 85 °C)
125 V.AC, 250 V.AC
Capacitance range
100 V.DC 0.56 F to 10.0 F (E12)
250 V.DC 0.010 F to 10.0 F (E12)
400 V.DC 0.010 F to 2.2 F (E12)
630 V.DC 0.0010 F to 2.2 F (E12)
1000 V.DC 0.010 F to 0.22 F (E12)
1250 V.DC 0.0010 F to 0.22 F (E12)
125 V.AC 0.010 F to 0.068 F (E12)
250 V.AC 0.010 F to 2.2 F (E12)
Capacitance tolerance ±5 %(J), ±10 %(K)
Dissipation factor (tan d) tan d < 1.0 % (20 °C, 1 kHz )
Withstand voltage
• Rated volt. : 100 V.DC to 630 V.DC
Between terminals : Rated volt. (V.DC)×150 %, 60 s
• Rated volt. : 1000 V.DC, 1250 V.DC
Between terminals : Rated volt. (V.DC)×175 %, 2 s to 5 s or 1000 V.AC, 60 s
Between terminals to enclosure : 1500 V.AC, 60 s
• Rated volt. : 125 V.AC, 250 V.AC
Between terminals : Rated volt. (V.AC)×230 %, 60 s
Between terminals to enclosure : 1500 V.AC, 60 s
Insulation resistance (IR)
100 V.DC to 630 V.DC : C < 0.33 F : IR > 9000 MΩ
(20 °C, 100 V.DC, 60 s)
C > 0.33 F : IR > 3000 MΩ  µF
1000 V.DC, 1250 V.DC : IR > 10000 MΩ (20 °C, 100 V.DC, 60 s)
IR > 2000 MΩ (20 °C, 500 V.DC, 60 s)
125 V.AC, 250 V.AC : C < 0.47 F : IR > 2000 MΩ (20 °C, 500 V.DC, 60 s)
C > 0.47 F : IR > 3000 MΩ  µF (20 °C, 100 V.DC, 60 s)
✽
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
✽
Voltage to be applied to ECQE1A (F) & ECQE2A (F) is only sine wave (50 Hz or 60 Hz).
Speci cations
Unit : mm
●
Packing quantity : 100 pcs./bag
Packaging speci cations for bulk package
Dimensions
Sep. 201702