Datasheet

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Plastic Film Capacitors
Polypropylene Film Capacitor
Type: ECQP(U)
Non-inductive construction using Polypropylene film
with flame retardant epoxy resin coating
■Features
•
Low loss and excellent frequency characteristics
•
Excellent temperature characteristics
•
High insulation resistance
•
RoHS directive compliant
■Recommended Applications
•
High frequency and high current circuits
•
General purpose circuit
■Explanation of Part Numbers
1234567891011
E C Q P U
■Explanation of Part Number for Odd Size Taping
E C Q P R
Product code Dielectric &
construction
Rated volt. Capacitance
U
7.5 mm
Crimped lead
Cap. Tol. Suffix
■Specifications
Product code Dielectric &
construction
Rated volt. Capacitance Cap. Tol. Suffix Suffix
200 VDC 400 VDC 630 VDC
246
±
2 %
±
5 %
±
10 %
GJK
Crimped lead
B
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Dissipation factor
(tan )
Withstand voltage
–40 ˚C to +105 ˚C
200 VDC, 400 VDC, 630 VDC
(Derating of rated voltage by 2.0 %/˚C at more than 85 ˚C)
(Derating is required according to cap. value.)(
❈Refer to the following table)
200 V : 0.015 µF to 0.47 µF
400 V : 0.0082 µF to 0.47 µF
630 V : 0.0010 µF to 0.10 µF
±2 %(G), ±5 %(J), ±10 %(K)
tan
<
=
0.1 % (20 ˚C, 1 kHz)
Between terminals : Rated volt. (VDC) ✕ 250 % 1 s to 5 s
Insulation resistance (IR)
C
<
=
0.33 µF : IR
>
=
45000 MΩ
(20 ˚C, 100 VDC
, 60 s)
C>0.33 µF : IR
>
=
15000 MΩ .µF
❈ Derating of rated voltage to capacitance value
Cap. value (µF) Cap. value (µF)
0.11— 0.12
0.13— 0.15
0.16— 0.18
0.20— 0.22
0.24—0.27
0.30—0.33
0.36—0.39
0.43—0.47
Rated volt. Rated volt.
200 VDC 200 VDC400 VDC 400 VDC630 VDC 630 VDC
195 V
190 V
185 V
180 V
175 V
170 V
165 V
160 V
390 V
380 V
370 V
360 V
350 V
340 V
320 V
300 V
615 V
600 V
585 V
570 V
—
—
—
—
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Mar. 2006