Datasheet

9 of 9
Apr. 1, 2008
CLASSIFICATION
SPECIFICATIONS
No.
SUBJECT
PAGE
DATE
151S-ECJ-SS018E
Multilayer Ceramic Chip Capacitor
Common S
p
ecification
(
Precautions for Use
)
Note ;
3- 9.Mechanical Impact
(1) The Capacitors shall be free from any excessive mechanical impact.
The Capacitor body is made of ceramics and may be damaged or cracked
if dropped.
Never use a Capacitor which has been dropped; their quality may be
impaired and failure rate increased.
(2) When handling PC boards with Capacitors mounted on them, do not allow
the Capacitors to collide with another PC board.
When mounted PC boards are handled or stored in a stacked state, impact
between the corner of a PC board and the Capacitor may cause damage or
cracking and can deteriorate the withstand voltage and insulation
resistance of the Capacitor.
4. Other
For special mounting conditions, please contact us.
Precautions for Use above are from
The Technical Report EIAJ RCR-2335 Caution Guide Line for Operation of Fixed Multilayer
Ceramic Capacitors for Electronic Equipment by Japan Electronics and Information Technology
Industries Association (March 2002 issued)
Please refer to above technical report for details.
Floor
Crack
Mounted PCB
Crack