Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsThin film capacitor SMD 0805 8200 pF 10 Vdc 2 % (L x W) 2 mm x 1.25 mm 1 pc(s)

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.

Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.

Plastic Film Capacitors

Stacked Metallized PPS Film Chip Capacitor

Type: ECHU(X)

Stacked metallized PPS film as dielectric with simple

mold-less construction

■Features

•

Small in size (minimum size 1.6 mm

0.8 mm)

•

85 ˚C, 85 %RH, W.V.

1.0 for 500 hours

•

For reflow soldering

•

RoHS directive compliant

■Recommended Applications

•

Time-constant

•

Filtering

•

Oscillation and resonance

■Explanation of Part Numbers

123456789101112

E C H U

Product code

Dielectric &

construction

Rated voltage

Capacitance

Cap. Tol. Suffix

Suffix

2 %

5 %

■Specifications

■Construction ■Dimensions in mm (not to scale)

❈ Please consult us for flow soldering

❈

In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please

refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.

01 10 VDC

1C 16 VDC

1H 50 VDC

8 mm

size ø180 mm

12 mm

size ø330 mm

❈

Tape width 8 mm

and diameter

ø330 mm reel is

prepared.

Tape width

Reel diameter

Category temp. range

(Including temperature-rise on unit surface)

Rated voltage

Capacitance range

Capacitance tolerance

Withstand voltage

Dissipation factor (tan )

Insulation resistance (IR)

−55 ℃ to ＋125 ℃

10 VDC，16 VDC，50 VDC

(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ℃at more than 105 ℃)

0.00010 µF to 0.22 µF (E12)

±2 %(G), ±5 %(J)

Between terminals : Rated volt. (VDC)

150 % 60 s

tanδ≦0.6 % (20 ℃, 1 kHz)

10 VDC：IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)

16 VDC：IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)

50 VDC：IR≧3000 MΩ (20 ℃, 50 VDC, 60 s)

Soldering conditions

Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)

saize

code

L WH e g

K1 1.6 0.8 0.7 0.35 ≧0.4

J1 2.0 1.25 0.9 0.45 ≧0.6

J2 2.0 1.25 1.1 0.45 ≧0.6

H1 3.2 1.6 0.9 0.65 ≧1.0

H2 3.2 1.6 1.1 0.65 ≧1.0

H3 3.2 1.6 1.5 0.65 ≧1.0

G1 3.2 2.5 1.1 0.65 ≧1.0

G2 3.2 2.5 1.5 0.65 ≧1.0

G3 3.2 2.5 2.1 0.65 ≧1.0

E1 4.8 3.3 1.5 0.80 ≧2.0

E2 4.8 3.3 2.1 0.80 ≧2.0

D1 6.0 4.1 1.9 0.80 ≧2.0

D3 6.0 4.1 2.5 0.80 ≧2.0

D4 6.0 4.1 2.8 0.80 ≧2.0

Summary of content (3 pages)

PAGE 1
Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction ■Features • Small in size (minimum size 1.6 mm ✕ 0.8 mm) • 85 ˚C, 85 %RH, W.V. ✕ 1.
PAGE 2
Plastic Film Capacitors ■Taping Specification for Automatic Mounting Refer to the page of taping specifications ■Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ±2 % (G), ±5 % (J) Rated volt. 16 VDC Cap. (µF) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Part No.
PAGE 3
Plastic Film Capacitors ■Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ±2 % (G), ±5 % (J) Rated volt. 10 VDC Cap. (µF) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0,0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Dimensions (mm) Part No.