Operating instructions

71
Sending Documents via LAN
One-Touch Dialling
One-Touch Dialling allows you to dial a full email address or telephone number by pressing a single key.
To use this method, you must first preprogram the email address or telephone number into the One-Touch
keys.
Set document(s) face down.
You can temporarily change the transmission settings.
Press a One-Touch key (01–32).
Ex:
01
If a telephone number is stored into the One-Touch key, the
display shows:
START
The document(s) is stored into memory with a file number.
Then starts to send the email message.
1. If your machine sounds an alarm (pi–pi–pi) at Step 2, this indicates that the Dialer is Full (more than 30
transmission reservations including G3 communication have been already reserved).
2. If the transmission can not be completed for any reason, the email may be returned undelivered, otherwise
no reply will be printed.
04007000001
04007020002
04007050001
04003060058
#@multitude
04007060001
#@multitude2
04007060005
04007060004
#@multitude2
Note:
04007070003
#@multitude2
04007070002
#@multitude2
ENTER STATION(S)
THEN PRESS START 00%
<01> (Station name)
[e-mail]❚
<01>(Station name)
5551234
* STORE * NO.001
PAGES=01 01%
* STORE * COMPLETED
TOTAL PAGES=05 25%
ON LINE * MEM.XMT *
[e-mail]
4
1
2
3