Operating instructions

67
Basic Transmission Settings
You can temporarily change the following transmission settings either before or after you place the document
on the ADF or Platen Glass.
• Contrast
• Resolution
• Stamp
• Communication Journal
After your document has been sent, your machine will automatically return to the preset settings.
Contrast
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press CONTRAST to:
CONTRAST = Normal CONTRAST =Lighter CONTRAST = Darker
DARKER
LIGHTER
CONTRAST
DARKER
LIGHTER
CONTRAST
DARKER
LIGHTER
CONTRAST
To change the preset Contrast position, change the setting of Fax Parameter No. 01, see page 60.
Resolution
Your machine is preset to Fine resolution, this setting is suitable for most business documents. If required,
this setting can be changed to Normal or 400 dpi. However, care should be exercised when using the 400
dpi setting as some Internet Fax models may not support the 400 dpi resolution, such as UF-770i.
Press RESOLUTION to:
RESOLUTION = Standard
400 dpi
FINE
RESOLUTION
400 dpi
FINE
RESOLUTION
400 dpi
FINE
RESOLUTION
RESOLUTION = Fine RESOLUTION = 400 dpi
To change the preset Resolution position, change the setting of Fax Parameter No. 02, see page 60.
04002000001
04002030004
04002020006
04002050006
Note:
04002070001
04002020002
04002050009
Note:
04002070002
4