Operating instructions

User Parameters

Setting Your LOGO

When you send a document, your LOGO appears at the top of the copy printed out at the other station.

The LOGO helps to identify you to someone who receives your document.

FUNCTION

SET

repeatedly until display shows;

Enter your LOGO (max. 25 characters and digits) by using

the Character keys (see page 10).

Ex: P A P8 CAPS n a s o n i c

If you make a mistake, use < or > to move the cursor

over the incorrect character, then overwrite it with a correct

one.

If more than 19 characters are entered, the left side

characters will scroll off the display. (See note 2)

SET

STOP

1. Your Company Name or your name must be set as your LOGO because it is required by the Telephone

Consumer Act of 1991. (For details, see FCC NOTICE at the end of this User’s Guide)

2. To switch between upper and lower character set, press

P8 CAPS

key. After the character is

entered, the cursor remains on the character awaiting for the next entry or change of character set.

02009000001

02009020002

02009050002

02007060008

#@multitude

02009060001

#@multitude

02009060004

02009060011

02007060005

#@multitude

Note:

02009070004

02009070014

#@multitude

SET MODE (1–6)

ENTER NO. OR 

1:USER PARAMETERS?

PRESS SET TO SELECT

LOGO

Panasonic❚