User guide
Table Of Contents
- Table of Contents
- Getting to Know Your Machine
- Installing Your Machine
- Main Unit and Accessories
- Installing the Accessories
- Toner Cartridge
- Loading the Recording Paper
- Adjusting the Paper Cassette for the Paper Length
- Adjusting the Paper Cassette for the Paper Width
- Connecting the LAN Cable, Telephone Line Cable and Power Cord
- Dialing Method (Tone or Pulse)
- Adjusting the Volume
- User Parameters
- Setting the Internet Parameters
- Programming or Retrieving Parameters
- Using Email to Program or Retrieve Parameters
- Using a PC to Input the Internet Parameters Remotely
- Inputting the Internet Parameters for the First Time
- Retrieving the Internet Parameters for Backup
- Editing the Retrieved or Backup Internet Parameters File
- Using a PC to Update the Auto Dialer Remotely
- Deleting the Entire Auto Dialer
- Programming One-Touch/ABBR. No. for the First Time
- Retrieving One-Touch/ABBR. No. Data for Backup
- Editing the Retrieved or Backup One-Touch/ABBR. No. Data File
- Using Email to Retrieve the Journal
- Programming Your Machine
- Basic Operations
- Loading Documents
- Basic Transmission Settings
- Sending Documents via LAN
- General Description
- Manual Email Addressing
- One-Touch Email Addressing
- Abbreviated Email Addressing
- Directory Search Dialing
- Multi-Station Transmission (Broadcasting)
- Memory Transmission Reservation (Multi-tasking)
- Automatic Redialing
- Manual Redialing
- Selectable Domains
- Internet Fax Delivery Notice (MDN)
- Returned Email
- Using a Mailing List
- Sending Documents via Telephone Line
- Receiving Documents via LAN
- Receiving Documents via Telephone Line
- Making Copies
- Advanced Features
- Network Features
- Network Scanner
- Network Printer
- Relayed Transmission
- Selective Reception
- Password Communications
- Confidential Mailbox
- General Description
- Confidential Mailbox
- Sending a Confidential Document to a Remote Station's Mailbox
- Polling a Confidential Document from a Remote Station's Mailbox
- Receiving a Confidential Document to Your Machine's Mailbox
- Storing a Confidential Document in Your Machine's Mailbox
- Printing Out a Confidential Document from Your Machine's Mailbox
- Deleting a Confidential Document Stored in Your Machine's Mailbox
- Sub-addressing
- Printout Journals and Lists
- Problem Solving
- Appendix
40
Connecting the LAN Cable, Telephone Line Cable and Power Cord
■ Power Cord
Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on
the rear of the machine.
Note:
1. Make sure that the LAN Cable is plugged into the RJ-45 LAN Jack before applying power to the machine.
2. If the Dynamic Host Configuration Protocol (DHCP) is not available, an Information Code 722 will appear
on the Display. Please refer to the Information Codes table on page 228 for additional information.
Warning: This apparatus must be properly grounded through an ordinary 3 prong AC outlet.
Do not break off the earth (ground) prong to fit a 2 prong outlet.
■ Telephone Line Cable
Plug one end of the telephone line cable into the "RJ-11C" telephone jack supplied by the telephone
company and the other end into the LINE jack on the left side of the machine.
■ Ethernet LAN Cable
NOTE
1. Your machine uses little power and you should keep it ON at all times. If the power is turned
OFF for too long, the clock contents may be lost.
Power Cord (Included)
Telephone Line Cable (Included)
RJ-11C Telephone Jack
Ethernet-Token-Ring Bridge
(Optional Order No. UE-204006)
10Base-T/100Base-TX Ethernet Hub
Ethernet LAN (10Base-T/100Base-TX)
Cable (Not included)