User guide
Table Of Contents
- Table of Contents
- Getting to Know Your Machine
- Installing Your Machine
- Main Unit and Accessories
- Installing the Accessories
- Toner Cartridge
- Loading the Recording Paper
- Adjusting the Paper Cassette for the Paper Length
- Adjusting the Paper Cassette for the Paper Width
- Connecting the LAN Cable, Telephone Line Cable and Power Cord
- Dialing Method (Tone or Pulse)
- Adjusting the Volume
- User Parameters
- Setting the Internet Parameters
- Programming or Retrieving Parameters
- Using Email to Program or Retrieve Parameters
- Using a PC to Input the Internet Parameters Remotely
- Inputting the Internet Parameters for the First Time
- Retrieving the Internet Parameters for Backup
- Editing the Retrieved or Backup Internet Parameters File
- Using a PC to Update the Auto Dialer Remotely
- Deleting the Entire Auto Dialer
- Programming One-Touch/ABBR. No. for the First Time
- Retrieving One-Touch/ABBR. No. Data for Backup
- Editing the Retrieved or Backup One-Touch/ABBR. No. Data File
- Using Email to Retrieve the Journal
- Programming Your Machine
- Basic Operations
- Loading Documents
- Basic Transmission Settings
- Sending Documents via LAN
- General Description
- Manual Email Addressing
- One-Touch Email Addressing
- Abbreviated Email Addressing
- Directory Search Dialing
- Multi-Station Transmission (Broadcasting)
- Memory Transmission Reservation (Multi-tasking)
- Automatic Redialing
- Manual Redialing
- Selectable Domains
- Internet Fax Delivery Notice (MDN)
- Returned Email
- Using a Mailing List
- Sending Documents via Telephone Line
- Receiving Documents via LAN
- Receiving Documents via Telephone Line
- Making Copies
- Advanced Features
- Network Features
- Network Scanner
- Network Printer
- Relayed Transmission
- Selective Reception
- Password Communications
- Confidential Mailbox
- General Description
- Confidential Mailbox
- Sending a Confidential Document to a Remote Station's Mailbox
- Polling a Confidential Document from a Remote Station's Mailbox
- Receiving a Confidential Document to Your Machine's Mailbox
- Storing a Confidential Document in Your Machine's Mailbox
- Printing Out a Confidential Document from Your Machine's Mailbox
- Deleting a Confidential Document Stored in Your Machine's Mailbox
- Sub-addressing
- Printout Journals and Lists
- Problem Solving
- Appendix
38
Adjusting the Paper Cassette for the Paper Length
The factory default Paper Length setting for the Paper Cassette is on Letter size. To change the paper
length to A4 or Legal size, follow the steps below.
NOTE
1. If you forget to change the Recording Paper Size setting in Fax Parameter No. 23 when
different paper is installed in the cassette, the unit will Stop printing after the 1st page of an
Incoming Fax and display a "PAPER SIZE MISMATCH" error. Then, the Recording Paper
Size setting automatically adjusts to the proper size and the unit resumes printing the Incoming
Fax from the 1st page.
How to Adjust the Paper Cassette for the Paper Length
1
1. Remove the paper from the Paper
Cassette and place the cassette upside
down on a flat surface.
2. While pushing down on the release latch,
pull out the Paper Length Guide.
3. Turn the Paper Cassette upright.
4. Insert the Paper Length Guide hooks into
the appropriate paper length slots (A4 or
Legal) and slide the guide towards the
back of the cassette until it locks in place.
5. Load the paper into the Paper Cassette.
Slide the paper width guide to the left
until it lightly touches the stack of paper
without bending the paper. The paper
must fit squarely and firmly between the
Paper Width Guide and the right side of
the tray. If it does not, the paper may
feed into the printer incorrectly resulting
in a paper jam.
Caution:
Make sure that the paper is set
under the metal Paper
Separation Clips and that it
does not exceed the Maximum
Paper Capacity Mark. You can
load about 250 sheets (20 lb
weight). For paper
specification, see page 241
.
6. Replace the Paper Cassette Cover to the
appropriate paper position (LTR, A4 or
LGL).
7.
Slide the Paper Cassette into the
machine.
2
The Recording Paper Size setting of the Fax
Parameter No. 23 must match the paper
loaded in the cassette. If you change the
Recording Paper Size, please change the
setting accordingly. (See page 80)
Paper Width Guide
Max. Paper
Capacity Mark
LGL
A4
LTR
Paper Length Guide
Release Latch