User guide

Relayed Transmission
190
Using your email application, you can send any document(s) from your PC as a TIFF-F attachment to one or
multiple G3 fax machines automatically through the Internet Relay Station.
The Internet Relay Station (your machine) must be properly setup with all the required parameters.
To send a Relayed Transmission from your PC using your email application, follow the example below.
• Relay XMT Password:sg-rly
• # + End Receiving Station (with Phone Number): #81331111234 (see Note 1)
• # *+ End Receiving Station (with Abbreviated Dialing Number): #*001 - #*100 (see Note 1)
• # *+ End Receiving Station (with One-Touch Number): #*1001 - #*1028 (see Note 1)
• # *+ End Receiving Station (with Program Key as a Group Dialing): #*2001 - #*2004 (see Note 1)
• @ + Relay Station's Domain Name: @singapore.panasonic.co.sg
Your PC sends the text document(s) to the Relay email address of the Relay Station with the telephone
number of the End Receiving Station.
After the Relay Station completes its transmission to the End Receiving Station(s), your PC receives a
COMM. Journal from the Relay Station. This Journal confirms whether the Internet Relayed Transmission
was successful.
NOTE
1. The "#" and "*" symbol must be entered after the Relay XMT Password as it indicates to your
machine that a phone number for the End Receiving Station will follow.
2. If the Relay Station requires a special access number to get an outside line, enter that access
number first then enter a hyphen (represented by a "-") before entering the full number.
Sending Document(s) from a PC to a G3 Fax Machine
Ex: In the "To:" box of your email application, type the following:
sg-rly#[e-mail]
or
sg-rly#*[e-mail]