Operating Instructions

RQTC0077
18
Troubleshooting guide
Television displays
“ERR H ”
 stands for a
number.
Trouble may have occurred. The number following “H”
depends on the status of the unit. Turn the unit off and then
back to ON. Alternatively, turn the unit off, disconnect the
AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service number
and contact a qualied service person.
•
•
“ERR U11” The disc may be dirty. (19)
You haven’t inserted the disc correctly: Insert it correctly. (8)
•
•
“NODISC” You haven’t inserted a disc: Insert one.
You haven’t inserted the disc correctly: Insert it correctly. (8)
•
•
“X” The operation is prohibited by the unit or disc.•
“THIS DISC MAY
NOT BE PLAYED IN
YOUR REGION.”
You can only play DVD-Video if their region number is the
same or includes the same region number as the unit or if
the DVD-Video is marked “ALL”. Conrm the region number
for the unit on the rear panel. (Cover)
•
“THIS TYPE OF
DISC CANNOT
BE PLAYED.
PLEASE INSERT A
DIFFERENT DISC.”
You inserted a disc that has not been nalized. (5)
You inserted a disc the unit cannot play; insert one it can. (5)
You inserted a blank disc.
•
•
•
Recording
Cannot record to
digital recording
equipment.
(Incorrect sound
recorded.)
You cannot record MP3.
You cannot record DVDs that have protection preventing
digital recording.
You cannot record DVDs if the recording equipment cannot
handle signals with a sampling frequency of 48 kHz.
Make the following settings:
– Advanced surround: OFF
(10, 13)
– DOWN SAMPLING: ON
(15)
– DOLBY DIGITAL/MPEG
Except Asia
: PCM (15)
– DTS: OFF
(15)
•
•
•
•
Troubleshooting guide
Progressive video
There is ghosting
when progressive
output is on.
This problem is caused by the editing method or material
used on DVD-Video, but should be corrected if you use
interlace output. Change “VIDEO OUT (I/P)” in “VIDEO” tab
to “INTERLACE”. (15)
•
Pictures not in
progressive output.
If the unit is connected to the television through VIDEO OUT
or S VIDEO OUT
]
, output will be interlace.
]
Except the United Kingdom and Continental Europe
•
Sound incorrect
Sound distorted. Set Advanced surround to “OFF”. (10, 13)•
Piercing noise
comes from the
speakers.
If you have connected a digital amplier which does not
include decoder, be sure to set “DOLBY DIGITAL”,
“MPEG
Except Asia
” to “PCM” and set “DTS” to “OFF” in
“AUDIO” tab. (15)
•
Effects do not work. None of the audio effects work when the unit is outputting
bitstream signals from the COAXIAL terminal. (7)
Some audio effects do not work or have less effect with
some discs.
•
•
Unit displays
The United Kingdom and Continental Europe
“noPLAy” You inserted a disc the unit cannot play; insert one it can. (5)
You inserted a blank disc.
You inserted a disc that has not been nalized. (5)
•
•
•
“U11” The disc may be dirty. (19)
You haven’t inserted the disc correctly: Insert it correctly. (8)
•
•
“H ”
 stands for a
number.
Trouble may have occurred. The number following “H”
depends on the status of the unit. Turn the unit off and then
back to ON. Alternatively, turn the unit off, disconnect the
AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service number
and contact a qualied service person.
•
•
“nodISC” You haven’t inserted a disc: Insert one.
You haven’t inserted the disc correctly: Insert it correctly. (8)
•
•