Operating instructions

Basic operations
RQT6730
8
Press [FL SELECT].
Each time you press the button:
Program/Play list/Group/Title/Chapter/Track/Picture/Content number
display
Time display
[VCD] [CD] [WMA] [MP3]
The unit usually plays the disc in the play position and then stops. Turn
sequential play on to play all loaded discs, except for DVDs and JPEG
discs.
Press [SEQUENTIAL].
Each time you press the button:
SEQ on () SEQ off
≥On the main unit, press [CD SEQUENTIAL].
≥HighMAT menus and Video CD playback control are disabled.
≥You cannot change the mode during program or random play.
≥Sequential Mode turns off when you switch the unit to standby.
Main unit only
1 Press [DISC EXCHANGE].
The drawer opens and the disc in the play position comes to the
front-left position.
2 Change the disc in the front-left position.
3 Press [DISC EXCHANGE].
You can change the other discs without interrupting play.
Main unit only
1 Press [<] to open the drawer.
2 Press [DISC SKIP] to rotate the carousel.
The carousel moves one tray clockwise and each subsequent press
moves it two trays in alternate directions.
3 Change the disc and press [<].
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press the numbered buttons.
To select a 2-digit number
e.g. 23: [S10] ➜ [2] ➜ [3]
[WMA] [MP3] [JPEG]
Press the numbered buttons then press [ENTER].
e.g. 123: [1] ➜ [2] ➜ [3] ➜ [ENTER]
≥This works only when stopped with some discs.
≥When playing DVD-Audio and you want to start play from a track in a
different group, select the group first (➜ below).
[DVD-A] [WMA] [MP3] [JPEG]
1 Press [GROUP].
2 Press [3, 4] to select the group number and
press [ENTER].
3 Press [3, 4] to select the track/picture number
and press [ENTER].
≥You can also select the group and track/picture number with the
numbered buttons.
≥Playing bonus groups
Some discs contain bonus groups. If a password screen appears after
selecting a group, enter the password with the numbered buttons. Refer
also to the disc’s jacket.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
(When the elapsed play time is displayed)
[JPEG]
Memorize positions on up to five discs to restart play after switching the
unit to standby or changing discs.
During play
1 Press [POSITION MEMORY].
2 Press [Í] to switch the unit to standby, or
change the disc.
3 When you are ready to play the disc again
Press [1] (PLAY) to restart from the position.
≥When you memorize the sixth position, the earliest position is replaced.
≥This function does not work while playing some DVDs or play lists on
DVD-RAM.
≥You cannot recall the position in Sequential Mode.
The message appears.
Press [1] (PLAY) again to review the first few seconds of the chapters up
to the one where you memorized the position. Play then resumes from the
memorized position.
Do not press [1] (PLAY) if you do not want to review chapters.
Basic play
Changing the main unit display
Sequential play
Changing the disc in the play position
CANCEL
123
456
789
0
10
DISC1 DISC2 DISC3
DISC4 DISC5
SLEEP
DISC
SETUP
OPEN/CLOSE
SEQUENTIAL
FL SELECT
GROUP
DIRECT NAVIGATOR
TOP
MENU
DISPLAY
SUBTITLE
PLAY MODE ZOOM
POSITION
MEMORY
DOUBLE
RE-MASTER
AUDIO ANGLE/PAGE
QUICK REPLAY
RETURN
MENU
ENTER
PLAY LIST
S
K
I
P
S
L
O
W
/
S
E
A
R
C
H
P
L
A
Y
P
A
U
S
E
S
T
O
P
QUICK
REPLAY
ANGLE/PAGE
POSITION
MEMORY
GROUP
CANCEL
SLEEP
<
1
3, 4, 2, 1
ENTER
SEQUENTIAL
FL SELECT
Í
PLAY MODE
POWER Í /I CD SEQUENTIAL
DISC
DOUBLE RE-MASTER ;∫ 1 :/65/9 DISC EXCHANGE DISC SKIP < OPEN/CLOSE
1 2 3 4 5
CD SEQUENTIAL
DISC SKIP
DISC EXCHANGE
<
Numbered
buttons
Changing other discs during play
Starting play from a selected item
Selecting groups to play
Position Memory function
Chapter Review [DVD-V]
Position memorized
Flashes as you
memorize a position.
Press PLAY to Chapter Review
:
;