Operating instructions

Getting started
RQT6730
5
Enjoy the powerful movie theater and hall-like sound available with
multiple channel audio found on DVDs by connecting an amplifier and
speakers.
∫ Recording Output
Digital recording ➜ Connection [A] to digital recording equipment
≥With DVD, the following conditions must be met: a the disc doesn’t have
protection preventing digital recording, and b the recording equipment
can handle signals with a sampling frequency of 48 kHz.
≥You cannot record WMA/MP3.
When recording DVDs, make the following settings.
–Advanced surround: OFF (➜ page 15)
–PCM Down Conversion: Yes (➜ page 17)
–Dolby Digital/DTS Digital Surround/MPEG: PCM (➜ page 17)
Analog recording ➜ Connection [B] to a cassette deck or other
recording equipment
There are no limitations on recording analog signals as there are with digital
signals.
Home Theater – Enjoying more powerful sound
DIGITAL AUDIO OUT
(
PCM/BITSTREAM
)
OPTICAL
A
(DVD) IN
AUDIO
OUT
L
R
B
AUX IN
L
R
Digital connection
Analog connection
Insert fully, with
this side facing
up.
Optical digital
audio cable
Do not bend sharply when
connecting.
Amplifier
To enjoy multi-channel surround sound
Connect an amplifier with a built-in decoder or a decoder-amplifier
combination.
Change the settings in “Digital output” (➜ page 17).
≥You can only use DTS Digital Surround decoders that are compatible
with DVD.
To enjoy stereo or Dolby Pro Logic
Connect a digital amplifier or system
component.
Change the settings in “Digital output”
(➜ page 17).
To enjoy stereo or Dolby Pro Logic
Connect an analog amplifier or system component.
Amplifier or system
component
Audio cable
Speakers (example)
Connect three or more speakers
for surround sound.
Quick setup
The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase and assists you to make necessary settings.
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
[1] Press [Í] to turn on the unit.
[2] Press [SETUP] to show the QUICK SETUP
screen.
[3] Press [3, 4, 2, 1] to select the menu language
and press [ENTER].
[4] Press [3, 4] to select “Yes” to continue and
press [ENTER].
[5] Press [3, 4, 2, 1] to select the item and press
[ENTER].
≥Audio language (➜ page 16)
≥Subtitle language (➜ page 16)
≥TV Aspect (➜ below)
≥Video Out (AV/Component) (➜ page 16)
≥Progressive Out (Component) (➜ page 16)
Only displayed when setting “Video Out (AV/Component)” to “Y PB
PR”.
[6] Press [ENTER] and then [SETUP] to end the
settings.
To return to the previous screen
Press [RETURN].
To access this screen again later
➜ page 16, Others—QUICK SETUP
∫ TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on
some discs is shown (➜ page 16, Video—TV Aspect).
≥4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the screen
of a 4:3 aspect television (unless prohibited by the
producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the letterbox style
on a 4:3 aspect television.
[1]
[3] • [4]
[5] • [6]
[2] • [6]
RETURN
CANCEL
123
456
789
0
10
DISC1 DISC2 DISC3
DISC4 DISC5
SLEEP
DISC
SETUP
OPEN/CLOSE
SEQUENTIAL
FL SELECT
GROUP
DIRECT NAVIGATOR
TOP
MENU
DISPLAY RETURN
MENU
ENTER
PLAY LIST
S
K
I
P
S
L
O
W
/
S
E
A
R
C
H
S
T
O
P
P
L
A
Y
P
A
U
S
E