User Guide

RQTC0145
16
DIALOG ENHANCER ( page 14, Dialogue enhancer)
RE-MASTER Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz
This feature gives you a more natural sound by adding the higher frequency signals not recorded on the disc.
Discs recorded at 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give you a sound closer to the original.
Press [e r] to select “OFF”, “1”, “2” or “3”.
Setting Type of music Effect level
1 High tempo (e.g., pop and rock) Light
2 Various tempos (e.g., jazz) Medium
3 Low tempo (e.g., classical) Strong
OFF Off Off
When connecting with DIGITAL AUDIO OUT terminal, the actual output sampling frequency depends on “PCM OUTPUT” setting in
“AUDIO” menu (
 page 19).
This feature may not work when connected with HDMI AV OUT terminals.
This may not work depending on the disc’s recording.
This does not work with on DVD-R/RW.
•
•
•
•
ADVANCED SURROUND
( page 13, Enjoying advanced surround)
PICTURE MODE ( page 13, Changing picture mode)
ZOOM ( page 14, Zoom)
DNR ( page 13, Reducing noise in pictures)
TRANSFER MODE ( page 14, Transfer mode)
SOURCE SELECT
(depends on disc)
When you select “AUTO” the constructing method of the DivX contents is automatically distinguished and output. If the picture is distorted,
select “INTERLACE” or “PROGRESSIVE” depending on which constructing method was used when the contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
Using On-Screen Menus
Using On-Screen Menus
On-Screen Menu 3 (Audio)
MP3
WMA
DVD-V
CD
DVD-V CD
MP3
WMA
MP3
On-Screen Menu 2 (Video)
DivX
You cannot use settings in On-Screen Menu 3 during pause, slow-motion, and search.
Note
RQTC0145-B.indd 16 2007-3-19 16:05:56