Operating Instructions

Feature Code Description
Default
key
Paper size in the
lower input tray 2
#389 To set the recording paper size in the lower input tray 2.
Note
• If the custom size (feature #391 or #392) has not been set,
custom size item will not be displayed.
• This feature will be displayed only when the lower input
tray 2 is installed (page 144).
• If any of the following paper sizes is selected, received fax
documents will be stored in memory (fax supported models
only). ( )
– "A5"/"A5-R"
– "B5(JIS)"/"B5-R(JIS)"
– "B5(ISO)"/"B5-R(ISO)"
– "16K"/"16K-R"
–
Input tray setting
for lists and
reports
#390 To set the input tray to use for lists and reports.
Note
• Following options are displayed only when the paper size
and the media type match. If either is changed, this setting
will be changed accordingly.
– "#1+#2"
– "#1+#3"
– "#1+#4"
*1
– "#2+#3"
– "#2+#4"
*1
– "#3+#4"
*1
– "#1+#2+#3"
– "#1+#2+#4"
*1
– "#1+#3+#4"
*1
– "#2+#3+#4"
*1
– "#1+#2+#3+#4"
*1
*1 Only for models that support the lower input tray 2.
( )
1
Custom size 1 for
copying
#391 To customise the recording paper size for copying.
Note
• If you have set feature #147 to "INCHES", the numbers
are displayed in inches.
–
Custom size 2 for
copying
#392 To customise the recording paper size for copying.
Note
• If you have set feature #147 to "INCHES", the numbers
are displayed in inches.
–
3.6 Programming features: Basic
54 Operating Instructions