Operating Instructions

A
B
• If necessary, slide the recording paper guides to
adjust the width to the size of the recording paper.
Note
• If the centre of the recording paper guide is
pinched too much, it could cause a paper
feeding error.
• Make sure that the recording paper is under the
paper limit mark ( ), and the paper should not be
loaded over the snubbers (
).
A
B
5. Insert the standard input tray into the unit, lifting the front part of the tray. Then push it completely into the
unit.
Note
• If the paper is not loaded correctly, re-adjust the paper guides, or the paper may jam.
3.2.1 Standard input tray
Operating Instructions 39