Operating Instructions

Note
• If the centre of the recording paper guide is
pinched too much, it could cause a paper
feeding error.
• If the message is still displayed, check the
recording paper specifications and load the
recording paper again. See page 36 for details.
• If there is any recording paper remaining in the
unit, remove it from the inside of the unit.
12.1.5 When the recording paper in the
multi-purpose tray is not fed into the unit
properly
The display will show the following:
– "CHECK PICK UP INPUT TRAY #2"
1.
Lift up the cover over the guides (
) until it
clicks into place.
A
2.
Remove the recording paper.
3.
Re-insert the recording paper.
4.
After loading the paper, push down the cover
(
).
A
Note
• If the message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 41 for details.
12.1.5 When the recording paper in the multi-purpose tray is not fed into the unit properly
Operating Instructions 173