Operating Instructions

7.3.2 Duplex feature

Duplex type Binding/Originals type Document setting

1-sided originals to 2-sided

copies

"LONG EDGE"

"SHORT EDGE"

Scanner glass or

automatic document

feeder ( )

2-sided originals to 1-sided

copies

"LONG EDGE"

"SHORT EDGE"

Automatic document

feeder ( )

2-sided originals to 2-sided

copies

"LONG LONG"/"Long Long Edge"

"LONG SHORT"/"Long Short Edge"

"SHORT LONG"/"Short Long Edge"

"SHORT SHORT"/"Short Short

Edge"

Automatic document

feeder ( )

"LONG EDGE" "SHORT EDGE"

1. Set the original.

2. : /COPY /DUPLEX

: Display "DUPLEX" screen (page 86).

3. Select the desired binding setting for copies. OK/SET

4. Enter the number of copies (up to 99).

5. /START

When using the scanner glass, scan the 1st page.

: To scan the next page, place the document and press OK/SET . Repeat this until all the

documents are scanned, then press /START .

: To scan the next page, place the document and press "Scan". Repeat this until all the documents

are scanned, then press "Print".

For 2-line LCD models only. ( )

Note

• After you finish copying, press : /STOP / : to reset this feature.

• For supported paper sizes, see page 186 for details.

• 2-sided copy is not available for the following feature.

– Quick ID copy feature (page 92)

– Image repeat feature (page 93)

– Poster feature (page 94)

• You can save the previous duplex setting (feature #470).

7.3.2 Duplex feature

90 Operating Instructions