Operating Instructions

5.4 Programming features: PC print
To change the feature settings, see page 49 for details.
Feature Code Description
Default
key
Input tray in PCL #760 To set the input tray in PCL.
Note
• Following options are displayed only when the paper
size and the media type match. If either is changed, this
setting will be changed accordingly.
– "#1+#2"
– "#1+#3"
– "#1+#4"
*1
– "#2+#3"
– "#2+#4"
*1
– "#3+#4"
*1
– "#1+#2+#3"
– "#1+#2+#4"
*1
– "#1+#3+#4"
*1
– "#2+#3+#4"
*1
– "#1+#2+#3+#4"
*1
*1 Only for models that support the lower input tray 2.
( )
1
Number of copies
in PCL
#762 To change the number of copies in PCL printing. Enter the
number of copies from "001" to "999", using the dial key
pad.
• The default setting is "001".
–
Paper size in PCL #763 To set the recording paper size. –
Recording paper
direction in PCL
#765 To set the recording paper direction in PCL.
1
A4 wide printing
in PCL
#766 If this feature is activated, the margin and printable area of
A4 recording paper will be changed so that 80 characters in
10 cpi font may be printed on a line.
0
Line per page in
PCL
#767 To set the number of lines per page in PCL printing.
Enter the number of lines per page from "005" to "128",
using the dial keypad.
• The default setting is "064".
–
Font source in
PCL
#768
"DOWNLOAD FONT" can be selected after the downloaded
font is registered to the unit.
1
5.4 Programming features: PC print
Operating Instructions 77