Operating Instructions

• Select Fax or Email Fax. OK/SET . To use the broadcast memory for Internet fax, select Email Fax.
3. Select the desired broadcast key.
4. Program items.
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press /LOWER , then press the desired station key.
• The number in brackets indicates the number of registered items.
• To program other items, repeat this step.
• If you have programmed the wrong item, press /STOP to erase the item.
5. OK/SET
6. Press /STOP repeatedly to exit.
Adding a new item into the broadcast memory
1.
: /MENU (repeatedly): "BROADCAST SETUP" OK/SET
: Display "Broadcast" screen (page 62).
• Select Fax or Email Fax. OK/SET
*1
. To use the broadcast memory for Internet fax, select Email
Fax.
2.
Select the desired broadcast memory location. OK/SET
*1
: /Tone / : "Add"
3.
Select the item you want to add. OK/SET
*1
• To add other items, repeat this step.
*1
For 2-line LCD models only. ( )
Erasing a stored item from the broadcast memory
For 2-line LCD models ( ):
1.
/MENU (repeatedly): "BROADCAST SETUP" OK/SET
2.
Select the desired broadcast memory location. OK/SET
3.
Select "EACH". OK/SET
4.
Select the item you want to erase. OK/SET
5.
OK/SET
For touch panel models ( ):
1.
Display "Broadcast" screen (page 62).
2.
Select the desired broadcast memory location.
3.
Select the desired item.
4.
"Delete" "Yes"
4.2.5 Programming items into the broadcast memory
Operating Instructions 65