Operating Instructions

Feature Code Description
Default
key
Left margin setting
for input tray
#394 To set the left margin for input tray.
1. /MENU 3 9 4
2. Select the desired input tray. OK/SET
*1
3. Change the setting. : OK/SET / :
"OK"
4. : OK/SET / : "OK"
• The unit will print the test page.
5. If necessary, repeat steps 3 to 4.
6. : /STOP / :
*1
For 2-line LCD models only. ( )
–
Power save #403 To set the length of time before the unit enters power save
mode.
Note
• During power save mode, the unit needs to preheat the
fuser unit before it can begin printing.
1
Quiet mode #455 When this feature activated, running noise becomes quiet, but
printing and scanning speed reduce to a quarter.
0
Multi-purpose tray
priority
#456 When this feature is activated, printing comes out from the
multipurpose tray first if input tray settings specify the multi-
purpose tray.
0
Contrast hold #462 To hold the previous contrast setting.
Note
• This feature is not available for scanning contrast.
0
Default operation
mode (2-line LCD
models only)
#463 To select the default operation mode (copy or fax) when the
selected time of the mode timer (feature #464) elapses.
Note
• You cannot select scan mode using this feature.
1
Mode timer #464
For 2-line LCD models:
To set the time before returning to the default operation mode
(feature #463).
For touch panel models:
To set the time before returning to the home screen.
2
QUICK-JOB
priority for copy (2-
line LCD models
only)
#478 The selected job will be displayed first.
1
Counter view for
departments
#479 To view the count number of copies/prints for departments. See
page 138 for details.
–
3.6 Programming features: Basic
Operating Instructions 55