Operating Instructions

Feature Code Description
Default
key
Proxy server #531 To set the proxy server for LAN connection.
1. /MENU 5 3 1
2. Select "ENABLED". OK/SET
*1
3. Select the desired access type. OK/SET
*1
4. Enter the IP address or domain name. :
OK/SET
/ : "OK"
• A domain name is up to 63 characters.
5. Enter the port number. : OK/SET /
: "OK"
*1
For 2-line LCD models only. (
)
0
IP filtering #532 When this feature is activated, the unit will deny/approve
access from the pre-programmed IP patterns. You can
program whether to deny or approve IP addresses. Up to 4
patterns each for IPv4 and IPv6 can be programmed through
the web browser interface (page 131).
0
Auto IP #533 To set the IP address automatically for the LAN connection.
This feature is available when feature #500 is activated.
When this feature is activated, IP address will be allocated
automatically without using a DHCP (Dynamic Host
Configuration Protocol) server.
0
HTTPD #534 To set HTTPD for the LAN connection. When this feature is
activated, you can access to the web server.
1
IPv6 protocol #535 When this feature is activated, IPv6 protocol can be used.
After installing the printer driver, be sure to change the port
to IPv6 protocol. You can check the IPv6 protocol address by
printing the "SETUP LIST" (page 133).
Note
• To activate this feature, you need to turn the power
switch of the unit OFF, then ON.
0
WINS server #1 #538 To set the primary WINS server for the LAN connection. This
feature is available when feature #500 is deactivated.
–
WINS server #2 #539 To set the secondary WINS server for the LAN connection.
This feature is available when feature #500 is deactivated.
–
WSD (Web
Service for
Devices)
#557 To activate the WSD (Web Service for Devices).
1
AirPrint #559 To activate the AirPrint feature.
1
Address book
editing on web
#567 When this feature is activated, you can check and edit the
address book through the web browser interface.
1
Caller ID list on
web
#568 When this feature is activated, you can check the Caller ID
list through the web browser interface (page 134).
1
Journal on web #569 When this feature is activated, you can check the journal
report through the web browser interface (page 134).
1
9.2 Programming features: LAN
128 Operating Instructions