Operating Instructions

Feature Code Description
Default
key
Fax receive notify #451 When this feature is activated, the computer connected to
your unit using USB/LAN
*1
will receive a notification when a
fax document is received.
Note
• When connecting to the LAN ( ): Register
computers to which fax reception notifications will be
sent through the web browser interface.
Select the PC to send fax reception notification message to
(up to 6 destinations).
1.
Start Multi-Function Station.
2.
[Device]
[Configuration Web Page] [Device]
3.
Type “root” as the user name, then enter the
programming password (feature #155). [OK]
4.
Select the [FAX FEATURE] from the menu.
5.
Select [ON] from the [RECEIVE NOTIFY] drop-down list.
6.
Click [Edit] next to [RECEIVE PC LIST].
7.
Click [List] next to the desired destination.
8.
Click the desired PC from the list. [Submit]
9.
Close the web browser.
0
Fax to email
address setting
#452 If you wish to transfer a received fax document to desired
email address, activate this feature (page 118).
0
All received fax
erase
#458 To erase all received fax memory.
• Disconnect the following cables before activating this
feature.
– Telephone line cord
– USB cable
– LAN cable (LAN supported models only) ( )
–
Set fax features to
default
#459 To reset fax features to their default settings.
–
*1
LAN supported models only ( )
8.9 Programming features: Fax
126 Operating Instructions