Operating Instructions

7.4 Programming features: Copy
To change the feature settings, see page 49 for details.
Feature Code Description
Default
key
Input tray setting
for copy
#460 To set the input tray to use for copy.
Note
• Following options are displayed only when the paper
size and the media type match. If either is changed, this
setting will be changed accordingly.
– "#1+#2"
– "#1+#3"
– "#1+#4"
*1
– "#2+#3"
– "#2+#4"
*1
– "#3+#4"
*1
– "#1+#2+#3"
– "#1+#2+#4"
*1
– "#1+#3+#4"
*1
– "#2+#3+#4"
*1
– "#1+#2+#3+#4"
*1
*1 Only for models that support the lower input tray 2.
( )
–
Default copy
resolution
#461 To change the default resolution setting for copying.
Note
• "HIGH-RES"(page 88) cannot be selected as the
default setting.
1
Page layout hold #467 To hold the previous page layout setting.
0
Zoom hold #468 To hold the previous zoom setting.
0
Collate hold #469 To hold the previous collate setting.
0
Duplex hold #470 To hold the previous duplex setting.
Note
• When this feature is activated, it will be effective for the
following:
– When making 1-sided originals into 2-sided copies
(page 90).
– When making 2-sided originals into 2-sided copies
(page 90).
• Even if this feature is activated, it will not be effective
when making 2-sided originals into 1-sided copies
(page 90).
• When making 2-sided originals into 2-sided copies, the
original document settings will be reset even if this
feature is activated.
0
Edge hold #473 To hold the previous edge setting.
0
7.4 Programming features: Copy
Operating Instructions 103